BenQ RM8602K RS232 & LAN Command List - Page 21

WOL 8 EyeCare 8 format the same as the value of Byte1 at Input (1) If Byte1=0x00(IP Setup Mode) at value. Byte2~Byte15 should be hex value Input value, the return value should be format Byte1=0x00 (1) If Byte1=0x00(IP Setup Mode) at Byte2=0x00: Manual Input value, the return value should be 0x01: DHCP Byte1=0x00 Byte3~9 are reserved, should be Byte2=0x00: Manual 0x00. 0x01: DHCP (2) If Byte1=0x01(IP Address) at Input Byte3~9 are reserved, should be value, the return value should be 0x00. Ex: IP address=169.254.81.38 (2) If Byte1=0x01(IP Address) at Input Byte1=0x01 (same as Byte1 at value, the return value should be Input value) Ex: IP address=169.254.81.38 Byte2=0xA9 (=169), Byte3=0xFE Byte1=0x01 (same as Byte1 at (=254), Byte4=0x51(=81), Byte5=0x26 Input value) (=38) Byte2=0xA9 (=169), Byte3=0xFE Byte6~9 are reserved, should be (=254), Byte4=0x51(=81), Byte5=0x26 0x00. (=38) (3) If Byte1=0x02~0x05 at Input value, Byte6~9 are reserved, should be refer to (2) 0x00. (4) If Byte1=0x06(MAC Address) at Input (3) If Byte1=0x02~0x05 at Input value, value, the return value should be refer to (2) Ex: MAC (4) If Byte1=0x06(MAC Address) at Input address=00:22:64:7E:2C:82 value, the return value should be Byte1=0x06 (same as Byte1 at Ex: MAC Input value) address=00:22:64:7E:2C:82 Byte2=0x00, Byte3=0x22, Byte1=0x06 (same as Byte1 at Byte4=0x64, Byte5=0x7E, Byte6=0x2C, Input value) Byte7=0x82 Byte2=0x00, Byte3=0x22, Byte8~9 are reserved, should be Byte4=0x64, Byte5=0x7E, Byte6=0x2C, 0x00. Byte7=0x82 Byte8~9 are reserved, should be 0x00. 000: Off g F0 001: On 000: Off 001: On 000: Off g F3 001: On 000: Off 001: On 21