BenQ RM8602K RS232 & LAN Command List - Page 4
Connections and communication settings
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Communication setting Baud rate select: 9600bps (fixed)/ Data bits: 8 bits (fixed) Parity: None (fixed)/ Stop Bits: 1(fixed) Command message reference PC sends to Monitor command packet followed by "CR". Every time PC sends control command to the Monitor, the Monitor shall response as follows: 1. If the message is received correctly, it will send "+" (02Bh) followed by "CR" (00Dh). 2. If the message is received incorrectly, it will send "-" (02Dh) followed by "CR" (00Dh). Connections and communication settings Choose one of the connections and set up properly before RS232 control. RS232 serial port connection 4
4
Communication setting
Baud rate select:
9600bps
(fixed)/ Data bits: 8 bits (fixed)
Parity: None (fixed)/ Stop Bits: 1(fixed)
Command message reference
PC sends to Monitor command packet followed by "CR". Every time PC sends control command to the
Monitor, the Monitor shall response as follows:
1.
If the message is received correctly, it will send "+" (02Bh) followed by "CR" (00Dh).
2.
If the message is received incorrectly, it will send "-" (02Dh) followed by "CR" (00Dh).
Connections and communication settings
Choose one of the connections and set up properly before RS232 control.
RS232 serial port connection