BenQ RM8602K RS232 & LAN Command List - Page 6

Value [1~3] CR Three bytes ASCII that defines the value 0x0D Set-function listing The PC can control the LCD Monitor for specific actions. The Set-Function command allows you to control the LCD monitor behavior in a remote sit through the RS232 port. The Set-Function packet format consists of 11 bytes. Set-function description Item Length TV ID Command Type Command Value [1~3] CR Description Total Bytes of Message excluding "CR" Identification for each of TV TV ID is "01" for LAN control & RS232 control Identify command type, "s" (0x73h): Set Command Function command code: One byte ASCII code Three bytes ASCII that defines the value 0x0D Set-function format Send: (Command Type="s") Name Length Byte count 1 Byte Bytes order 1 ID 2 Byte 2~3 Reply: (Command Type="+" or "-") Name Length ID Byte count 1 Byte 2 Byte Bytes order 1 2~3 Command type 1 Byte 4 Command type 1 Byte 4 Command 1 Byte 5 Value1 1 Byte 6 Value2 1 Byte 7 Value3 1 Byte 8 CR 1 Byte 9 CR 1 Byte 5 Example 1: Set Brightness as 76 and this command is valid. Send (Hex Format) Name Length ID Command type Hex 0x38 0x30 0x31 0x73 Command 0x24 Value1 0x30 Value2 0x37 Value3 0x36 CR 0x0D Reply (Hex Format) Name Length Hex 0x34 ID 0x30 0x31 Command type 0x2B CR 0x0D 6