Biostar M7VIP M7VIP user's manual - Page 12
Raid Connector: RAID1 Optional, Power Connectors: JATXPWR1, Wake On LAN Header: JWOL1, Front USB
View all Biostar M7VIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
MMootthheerrbbooaarrdd DDeessccrriippttiioonn Raid Connector: RAID1 (Optional) This connector supports RAID0 or RAID1 configuration through the onboard Serial ATA (FastTrak 376) controller chip. You can use the IDE feature to set up a disk array configuration and to support additional IDE devices. However, it can only support master mode IDE HDD. Power Connectors: JATXPWR1 (ATXJMAaTJiAnXTPPoXWwPeRWr C1Ron1n.) (ATX Power Conn.) Wake On LAN Header: JWOL1 Ground 5V_SB Wake up 1 WOL1 Front USB Header: JUSB1/ JUSB2/ JUSB3 Pin1,2 ==> +5V 2 Pin3,4 ==> Data(-) 1 Pin5,6 ==> Data(+) JUSB1/2 Pin7,8 ==> Ground Pin9 ==> KEY (For Version 1.0) Pin10 ==> NA Pin1,2 ==> +5V 2 1 Pin3,4 ==> Data(-) Pin5,6 ==> Data(+) JUSB2/3 Pin7,8 ==> Ground (For Version 1.1 Pin9 ==> KEY and above) Pin10 ==> NA 10