Biostar M7VIP M7VIP user's manual - Page 53
Optimize Array For, Performance RAID 0 Striping, Security RAID 1 Mirroring, Viewing Drive
View all Biostar M7VIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
MMootthheerrbbooaarrdd DDeessccrriippttiioonn Optimize Array For Select whether you want Performance (RAID 0), Security (RAID 1) under the "Optimize Array for" setting. Performance (RAID 0 Striping) Supports the maximum performance. The storage capacity equals the number of drives times the capacity of the smallest drive in the disk array. NOTE: FastTrak 376 permits striped arrays using 1, 2 drive attached in Auto Setup mode. Security (RAID 1 Mirroring) Creates a mirrored (or fault tolerant) array for data security. NOTE: Under the Security setting, FastTrak 376 permits two drives to be used for a single Mirrored array only. NOTE: If you wish to customize the settings of individual disk arrays (such as block size), you must manually create disk arrays with the Define Array option from the Main Menu. Viewing Drive Assignments The View Drive Assignments option in the Main Menu displays whether drives are assigned to a disk arrays or are unassigned. The menu also displays the data transfer mode that relates to speed used by each drive (U6 refers to 133MB/sec transfers, U5 refers to 100MB/sec transfers, U4 refers to 66MB/sec transfers, etc...) FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc. [ View Drive Assignments ] Channel:ID Drive Model Capacity(MB) 1 : Master QUANTUMCR8.4A 8063 2 : Master QUANTUMCR8.4A 8063 Assignment Array 1 Array 1 Mode U5 U5 [ Keys Available ] [↑] Up [↓] Down [ESC] Exit Mode (D=DMA, U=UDMA) 51