Home » Bosch Manuals » Dishwashers » Bosch SGE53C52UC » Manual Viewer

Bosch SGE53C52UC Use and Care Manuals - Page 28

Switching on the, appliance, Setting a cycle, Setting options, Setting the electronic, delay time,

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

en-us Basic Operation Notes ¡ Unintentional operation is activated when: - Pressing Start to begin a wash cycle - Setting Delay time and pressing Start - Opening the door while De- lay time is active - Opening the door during a wash cycle. ¡ This feature cannot be deacti- vated. 13.2 Switching on the appliance ▶ Touch with a short 1 second touch. The cycle last selected and the option last selected will be set by default. The buttons on the appliance are touch sensitive and only require a quick, gentle touch. If you do not perform any actions on the appliance for 10 minutes, it will automatically switch off. 13.3 Setting a cycle To adjust the wash cycle to the soiling level of the dishware, select a suitable program. ▶ Press the right cycle button. a The cycle is set and the cycle button flashes. a The remaining run time of the cycle appears on the display. 13.4 Setting options You can set options to complete the chosen wash program. Note: The available options depend on which program is selected. ▶ Press the button for the relevant option. a The option is set and the option button flashes. 13.5 Setting the electronic delay time You can delay the start of the wash cycle by up to 24 hours. 1. Press . a "h:01" appears on the display. 2. Use to set the required start time for the wash cycle. 3. Press . a This activates the electronic delay time. Tip: To deactivate the electronic delay time, press repeatedly until "h:00" appears on the display. 13.6 Starting the wash cycle ▶ Press . a The wash cycle has ended when the display shows "0h:00m". Notes ¡ If you want to add more dishware while the appliance is running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. ¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cycle", Page 29 28

Section	Page
Dishwasher	1
en-us	2
Table of contents	2
1 IMPORTANT SAFETY INSTRUCTIONS	4
1.1 Safety definitions	4
1.2 General information	4
1.3 Intended use	5
1.4 Restrictive Use	5
1.5 Grounding instructions	5
1.6 Safe use	6
1.7 Risk to children	8
1.8 State of California Proposition 65 Warnings	8
2 Preventing material damage	9
3 Environmental protection and energy-saving	9
3.1 Saving energy	9
3.2 AquaSensor	9
4 Familiarizing yourself with your appliance	10
4.1 Appliance	10
4.2 Controls	11
5 Dishwasher Cycles	13
5.1 Energy Guide	14
5.2 Favorite	15
5.2.1 Save Favorite on the appliance.	15
6 Options	15
7 Features	16
7.1 Upper rack	16
7.1.1 Adjusting upper rack with RackMatic®	16
7.2 Lower rack	17
7.3 Silverware Basket	17
7.4 Cup shelf	17
7.5 Flip tines	18
7.5.1 Folding down the tines	18
7.6 Knife Shelf	18
7.7 Rack heights	18
8 Before using for the first time	19
8.1 Initial use	19
9 Water softening system	19
9.1 Overview of water hardness settings	19
9.2 Setting the water softening system	20
9.3 Special Dishwasher Salt	20
9.3.1 Adding dishwasher salt	20
9.4 Switching off the water softening system	21
10 Rinse aid system	21
10.1 Rinse aid	21
10.1.1 Adding rinse aid	21
10.2 Setting the amount of rinse aid	22
10.3 Switching the rinse aid system off	22
11 Detergent	22
11.1 The correct detergents	22
11.2 Incompatible detergents	23
11.3 Information on Detergent	23
11.4 Adding Detergent	23
11.5 Detergent table	24
12 Dishware	24
12.1 Damage to glass and dishware	24
12.2 Loading dishware	25
12.3 Removing dishware	26
12.4 Loading patterns	26
13 Basic Operation	27
13.1 Protection against unintentional operation	27
13.2 Switching on the appliance	28
13.3 Setting a cycle	28
13.4 Setting options	28
13.5 Setting the electronic delay time	28
13.6 Starting the wash cycle	28
13.7 Activating the button lock	29
13.8 Deactivating the button lock	29
13.9 Interrupting the wash cycle	29
13.10 Terminating the wash cycle	29
13.11 Switching off the appliance	29
14 Basic settings	30
14.1 Overview of the basic settings	30
14.2 Changing the basic settings	31
15 Home Connect®	31
15.1 Home Connect® quick start	32
15.1.1 Setting up the Home Connect® app	32
15.1.2 Setting up Home Connect®	32
15.2 Home Connect® settings	32
15.3 Remote Start	32
15.3.1 Activating Remote Start	33
15.4 Remote Diagnostics	33
15.5 Software update	33
15.6 Data Protection	33
16 Cleaning and maintenance	34
16.1 Cleaning the tub	34
16.2 Cleaning agent	34
16.3 Tips on appliance care	34
16.4 Machine Care	34
16.4.1 Run Machine Care	35
16.5 Filter system	36
16.5.1 Cleaning filters	36
16.6 Cleaning the spray arms	37
17 Troubleshooting	38
17.1 Clean drain pump	50
18 Transportation, storage and disposal	51
18.1 Removing the appliance	51
18.2 Vacation and Storage	51
18.3 Transporting the appliance	51
18.4 Disposal of your old appliance	52
19 Customer Service	52
19.1 Model number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)	52
19.2 AquaStop® Pledge	52
20 Technical specifications	54
20.1 Information regarding Free and Open Source Software	54
21 STATEMENT OF LIMITED PRODUCT WARRANTY	54
21.1 What this warranty covers & Who it applies to	54
21.2 How long the warranty lasts	55
21.3 Extended Warranty	55
21.4 Repair/replace as your exclusive remedy	56
21.5 Out of warranty product	56
21.6 Warranty exclusions	57
21.7 Obtaining warranty service	58

Match case Limit results 1 per page

en-us

Basic Operation

Notes

Unintentional operation is

activated when:

–

Pressing Start to begin a

wash cycle

–

Setting Delay time and

pressing Start

–

Opening the door while De-

lay time is active

–

Opening the door during a

wash cycle.

This feature cannot be deacti-

vated.

13.2

Switching on the

appliance

▶

Touch

with a short 1

second touch.

The cycle last selected and the

option last selected will be set

by default.

The buttons on the appliance

are touch sensitive and only re-

quire a quick, gentle touch.

If you do not perform any ac-

tions on the appliance for 10

minutes, it will automatically

switch off.

13.3

Setting a cycle

To adjust the wash cycle to the

soiling level of the dishware, se-

lect a suitable program.

▶

Press the right cycle button.

The cycle is set and the cycle

button flashes.

The remaining run time of the

cycle appears on the display.

13.4

Setting options

You can set options to complete

the chosen wash program.

Note:

The available options de-

pend on which program is se-

lected.

▶

Press the button for the rele-

vant option.

The option is set and the option

button flashes.

13.5

Setting the electronic

delay time

You can delay the start of the

wash cycle by up to 24 hours.

Press

"h:01" appears on the display.

Use

to set the required

start time for the wash cycle.

Press

This activates the electronic de-

lay time.

Tip:

To deactivate the electronic

delay time, press

repeatedly

until "h:00" appears on the dis-

play.

13.6

Starting the wash

cycle

▶

Press

The wash cycle has ended

when the display shows

"0h:00m".

Notes

If you want to add more dish-

ware while the appliance is run-

ning, do not use the collecting

tray as a handle for the upper

rack. You might touch the par-

tially dissolved tablet.

You can only change a cycle in

progress if you can cancel it

first.

→

"Terminating the wash cy-

cle", Page 29