Bosch SGE53C52UC Use and Care Manuals - Page 41

Activate Extra Dry/intensive drying.

Page 41 highlights

Troubleshooting en-us Issue Cause and troubleshooting Dishware is not dry. ▶ Position dishware at an angle where possible. Silverware is not dry. Appliance interior still wet after wash cycle. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying performance. 2. Use a different combined detergent with a bet- ter drying performance. Extra Dry/intensive drying not activated to improve drying performance. ▶ Activate Extra Dry/intensive drying. Dishware removed too early or drying process not yet ended. 1. Wait until the program ends. 2. Only remove dishware 30 minutes after the program has ended. Rinse aid used has a limited drying performance. ▶ Use a name-brand rinse aid. Eco products may have limited effectiveness. Silverware not arranged properly in the silverware basket or silverware drawer. Droplets can form on the contact points of silverware. 1. Arrange silverware individually where possible. → Page 25 2. Avoid points of contact. Not an error. Condensation drying creates water droplets in the tub. This is normal. Moisture in the air condenses on the inside walls of the appliance, runs off, and is pumped out. No action required. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

Troubleshooting
en-us
41
Issue
Cause and troubleshooting
Dishware is not dry.
Position dishware at an angle where possible.
The combined detergent used has a poor drying
performance.
1.
Use rinse aid to improve drying performance.
2.
Use a different combined detergent with a bet-
ter drying performance.
Extra Dry/intensive drying not activated to im-
prove drying performance.
Activate Extra Dry/intensive drying.
Dishware removed too early or drying process not
yet ended.
1.
Wait until the program ends.
2.
Only remove dishware 30 minutes after the
program has ended.
Rinse aid used has a limited drying performance.
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not
dry.
Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silver-
ware.
1.
Arrange silverware individually where possible.
Page 25
2.
Avoid points of contact.
Appliance interior
still wet after wash
cycle.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the
air condenses on the inside walls of the appli-
ance, runs off, and is pumped out.
No action required.