Bosch SGE53C52UC Use and Care Manuals - Page 40
Cleaning filters, Setting the amount of rinse aid,
View all Bosch SGE53C52UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
en-us Troubleshooting Issue Cause and troubleshooting E:90-01 lights up alternately. Power voltage is too low. There is no problem with the appliance. 1. Call an electrician. 2. Have the power voltage and electrical installation checked by an electrician. E:92-40 lights up al- Filters are soiled or blocked. ternately. ▶ Clean the filters. → "Cleaning filters", Page 36 A different error code appears in the display window. E:01-00 to E:90-10 There is a technical issue. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 52 and give the error code. Dishware is not dry. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 21. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 22 Cycle or cycle option has no drying phase, or drying phase is too short. ▶ Select a wash cycle with drying. → Page 13 Some option buttons decrease the drying result. Water collects in recesses of dishware or silverware. 40