Bosch SGE53C52UC Use and Care Manuals - Page 42

Cleaning filters, Filter system,

Page 42 highlights

en-us Troubleshooting Issue Food remnants on dishware. Cause and troubleshooting Dishware was placed too close together or rack is overfilled. 1. Arrange dishware with sufficient space in be- tween. The spray jets must reach the surfaces of the dishware. 2. Avoid points of contact. Spray arm rotation of the lower spray arm is blocked. ▶ Arrange dishware so it does not obstruct spray arm rotation. Spray arm nozzles are blocked. ▶ Clean the Spray arms → Page 37. Filters are dirty. ▶ Clean the filters. → "Cleaning filters", Page 36 Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. → "Filter system", Page 36 2. Twist filters into place. Selected wash cycle is too light. ▶ Select a more intensive wash program. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. Tall narrow containers in corner areas are not rinsed out adequately. ▶ Do not position tall narrow containers at too great an angle or in corner areas. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

en-us
Troubleshooting
42
Issue
Cause and troubleshooting
Food remnants on
dishware.
Dishware was placed too close together or rack is
overfilled.
1.
Arrange dishware with sufficient space in be-
tween.
The spray jets must reach the surfaces of the
dishware.
2.
Avoid points of contact.
Spray arm rotation of the lower spray arm is
blocked.
Arrange dishware so it does not obstruct spray
arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms
Page 37
.
Filters are dirty.
Clean the filters.
"Cleaning filters", Page 36
Filters are inserted incorrectly and/or not en-
gaged.
1.
Insert the filters properly.
"Filter system", Page 36
2.
Twist filters into place.
Selected wash cycle is too light.
Select a more intensive wash program.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
Only remove large remnants of food and do not
pre-rinse dishware.
Tall narrow containers in corner areas are not
rinsed out adequately.
Do not position tall narrow containers at too
great an angle or in corner areas.