Bosch WTMC6321US User Guide - Page 17
Operation
View all Bosch WTMC6321US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operation Using the dryer i If the door has not been closed properly, the dryer will not start. 1. Open the door. 2. Check lint filter. The filter should be cleaned after and before every drying process. Cleaning the filter reduces the drying time and saves energy. 4. Select Additional Options" on the display. More detailed information on the individual additional options can be found on page 14. 5. If required, select Option" by pressing the button. The Options" are explained on page 15. i The estimated remaining time will be updated. 8. Press the Start/Stop" button. The Start/Stop" indicator light illuminates. i The program starts with an acoustic signal (if set). If an automatic program has been selected, the indicator lights indicate the progress of the program sequence. i At the end of the program sequence Damp dry an acoustic signal is emitted (if set). 3. Rotate program selector to the desired program. Select the program which corresponds to the laundry in the dryer from the program selection table (see page 16). The dryer light turns on inside the drum. i The estimated remaining time will be indicated. i Lint filter indicator flashes for 5 seconds - Check lint filter"! i The Start/stop" indicator light starts flashing. 6. Place laundry in the empty drum. Put each piece of laundry into the machine separately. For best results the laundry to be dried must be sorted according to type of laundry and desired degree of drying. For further information see page 13. i Observe drying symbols of the laundry manufacturer. If drying woolen clothing and shoes, see the information on page 61 and page 18. Ensure that there is only laundry in the drum. Check that all items are completely in the drum. 7. Close the door. The Start/Stop" indicator light continues flashing. i If you have chosen a time program don't forget to select a time. Otherwise the Start/Stop" indicator light will not flash and the dryer will not start. i At program end an acoustic signal is emitted (if set) and the LED Wrinkle block" illuminates. i When the drying process is complete (program or selected time program ended), the drum rotates at specific intervals. This prevent the laundry from creasing (see Extended Wrinkle Block", page 15). 9. Open the door. 17