Bosch WTMC6321US User Guide - Page 9

Check, list before, using, dryer, Preparing, to transport, dryer ć

Get Bosch WTMC6321US - Nexxt 700 Series Dryer PDF manuals and user guides View all Bosch WTMC6321US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

The dryer should be level with all four feet firmly on the ground. The dryer must not wobble. If the dryer is not level or if it does wobble, the feet must be adjusted. Adjust the heightĆadjustable feet until the dryer does not rock and is level, both frontĆtoĆback and sideĆtoĆside. 11. Connect the exhaust duct to the exhaust air outlet on the dryer. 12. Insert plug into the wall receptacle. Check list before using the dryer 1. Check that steps 1Ć12 have been implemented properly. 2. Ensure that the dryer is connected to the power supply. 3. Read the operating instructions to understand how your dryer operates. 4. Conduct an appliance test: q Check that the drum is empty. q Close the dryer door. q Switch the dryer to Extra Dry" and then press the Start button. q After 3Ć5 minutes press the Stop button and open the door. 5. If the interior of the dryer feels warm, the dryer has been connected properly. Switch the dryer to OFF". 6. If the dryer does not work, switch the dryer to OFF". Look in the troubleshooting section (page 21) of the OPERATING INSTRUCTIONS and find the fault. Preparing to transport the dryer ć step by step 1. Rotate the program selector to OFF". 2. Pull out power supply plug. 3. Disconnect the exhaust duct from the exhaust air outlet on the dryer. 4. Place any accessories in the drum. 5. Close the door and secure with adhesive tape. 6. Screw the heightĆadjustable feet of the dryer into the housing to prevent them from being damaged during transportation. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
9
The dryer should
be level
with
all
four
feet
firmly on the ground.
The
dryer must
not
wobble.
If±the dryer
is not
level
or if it
does
wobble,
the
feet
must
be adjusted.
Adjust
the
heightĆadjustable
feet
until
the
dryer does not
rock
and is
level,
both
frontĆtoĆback
and
sideĆtoĆside.
11.
Connect
the exhaust
duct
to the
exhaust
air outlet
on
the dryer.
12.
Insert
plug
into
the
wall
receptacle.
Check
list before
using
the
dryer
1.
Check that steps 1Ć12
have been
implemented
properly.
2.
Ensure that the dryer
is
connected
to
the power
supply.
3.
Read
the operating
instructions
to
understand
how your
dryer
operates.
4.
Conduct
an
appliance
test:
q
Check
that the drum is
empty.
q
Close the dryer door.
q
Switch
the dryer to
²Extra Dry"
and
then
press the Start
button.
q
After 3Ć5
minutes
press the
Stop button and
open
the door.
5.
If
the interior
of
the dryer
feels
warm,
the dryer has
been
connected
properly.
Switch
the dryer
to
²OFF".
6.
If
the dryer
does
not work,
switch
the dryer
to
²OFF".
Look
in
the troubleshooting
section (page 21) of
the
OPERATING
INSTRUCTIONS
and
find
the fault.
Preparing
to transport
the
dryer ć
step by±step
1.
Rotate the program
selector
to±²OFF".
2.
Pull out
power
supply plug.
3.
Disconnect
the exhaust
duct from
the exhaust
air
outlet
on
the dryer.
4.
Place
any accessories
in
the drum.
5.
Close the door and
secure with
adhesive
tape.
6.
Screw the heightĆadjustable
feet
of
the dryer into
the housing
to
prevent
them from being
damaged
during transportation.