Brother International 4234DT Users Manual - English and Spanish
Brother International 4234DT Manual
View all Brother International 4234DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International 4234DT manual content summary:
- Brother International 4234DT | Users Manual - English and Spanish - Page 1
English Español HANDBOOK FOR COMPACT OVERLOCK MACHINE MANUAL DE INSTRUCCIONES DE LA MAQUINA COMPACTA OVERLOCK Product Code: 884-B01 Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). Visítenos en http://solutions. - Brother International 4234DT | Users Manual - English and Spanish - Page 2
from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 16.This sewing machine is not intended for use by young children or infirm persons without supervision. 17.Young children should be supervised - Brother International 4234DT | Users Manual - English and Spanish - Page 3
repair or adjust the machine If the machine breaks down or needs adjustment, first follow the troubleshooting table to inspect and adjust the machine yourself. If the problem persists, consult your local authorized dealer. "SAVE THESE INSTRUCTIONS" "This sewing machine is intended for household use - Brother International 4234DT | Users Manual - English and Spanish - Page 4
THIS COMPACT OVERLOCK MACHINE Your machine is a high quality, easy-to-use product. To fully enjoy all the features, we suggest that you study this booklet. If you need more information regarding the use of your machine, your nearest authorized dealer is always happy to be of service. Enjoy yourself - Brother International 4234DT | Users Manual - English and Spanish - Page 5
INSTRUCTIONS I WARNING LABELS ...III Contents ...1 Chapter 1: Names of parts and their functions 2 Accessories ...3 Powering the machine sewing ...24 Narrow overlock/Rolled hemming stitch 25 Chart of narrow overlock/ Rolled hemming stitch 26 Chapter 6: Troubleshooting ...27 Chapter 7: - Brother International 4234DT | Users Manual - English and Spanish - Page 6
Presser foot pressure adjustment screw 3 Spool pin 4 Spool support 5 Thread take-up cover 6 Needles 7 Bed extension ratio adjustment dial J Stitch width dial K Thread guide 2 Inside of the front cover Tweezers . (See CHAPTER 5 "Narrow overlock/Rolled hemming stitch". Stitch finger, Stitch - Brother International 4234DT | Users Manual - English and Spanish - Page 7
Area) XC7438321 (230V Area) XC7456321 (U.K.) XD0112121 (Argentina) XD0852021 (Korea) XD0105021 (China) XE0629001 (Australia, New Zealand) XE3414001 (Brazil) 0 Instruction DVD: XB2007001 (NTSC) XB2014001 (PAL) A Thread change assembly: XB1991001 B Trim trap: XB1958001 C Stitch finger W: XB1902001 - Brother International 4234DT | Users Manual - English and Spanish - Page 8
plug. 2. Raise the presser foot lever. 1 3. Turn the hand wheel 2 so that the mark on the hand wheel is aligned to the line on the machine. (See CHAPTER1 "Turning direction of hand wheel".) 4. Push the button on the presser foot holder and the standard presser foot will be released. 3 4 5. Raise the - Brother International 4234DT | Users Manual - English and Spanish - Page 9
sewing. (See CHAPTER 5.) To install: Insert the trim trap until it contacts the front cover. NOTE: Be sure to position the positioning guide to the one on the machine. To remove: Slowly pull out the trim trap. NOTE: The optional trim trap can also be used as the foot controller holder - Brother International 4234DT | Users Manual - English and Spanish - Page 10
2 mm (5/64 inch). 2 Lengthen the stitch to a maximum of 4 mm (5/32 inch). Selection mark Stitch width The normal stitch width setting for regular overlock stitch is 5mm (13/64 inch). To change the stitch width, turn the stitch width adjustment dial. 1 2 1 Increase the width to a maximum of - Brother International 4234DT | Users Manual - English and Spanish - Page 11
feed This serger is equipped with two sets of feed dogs under the presser foot to move the fabric through the machine. The differential presser foot pressure Turn the pressure adjustment screw on the top left of the machine. You can adjust by reffering the value on the screw. The normal setting - Brother International 4234DT | Users Manual - English and Spanish - Page 12
Tension adjustment dial There is a thread tension dial for each needle thread, the lower looper thread and the upper looper thread. The correct thread tension may vary according to the type and thickness of the fabric and the type of thread used. Thread tension adjustments may be necessary for any - Brother International 4234DT | Users Manual - English and Spanish - Page 13
English Chart of thread tension adjustment, Two-needle (Four-thread) A: Reverse B: Surface C: Left needle thread D: Right needle thread E: Upper looper thread F: Lower looper thread A C Left needle thread is loose. Tighten left needle thread. B (yellow) A D B A C D B A F E B A F E B - Brother International 4234DT | Users Manual - English and Spanish - Page 14
Chart of thread tension adjustment, One-needle (Three-thread) A: Reverse B: Surface C: Needle thread D: Upper looper thread E: Lower looper thread C A B C E Needle thread is loose. Tighten needle thread. (yellow or green) A D B Needle thread is tight. Loosen needle thread. (yellow or - Brother International 4234DT | Users Manual - English and Spanish - Page 15
so that the mark on the hand wheel is aligned to the line on the machine. (See CHAPTER 1 "Turning direction of hand wheel".) 3. Loosen the corresponding needle so that the line on the hand wheel is aligned to the line on the machine. 3. Hold the needle with its flat side away from you and insert it - Brother International 4234DT | Users Manual - English and Spanish - Page 16
to the shape of the spool. 3. Turn the hand wheel so that the mark on the hand wheel is aligned to the line on the machine. (See CHAPTER 1 "Turning direction of hand wheel".) 12 - Brother International 4234DT | Users Manual - English and Spanish - Page 17
two-needle four-thread overlock stitch 3 4 left needle right needle 1 2 3 4 6 7 5 7 Thread for one-needle three-thread overlock stitch (right needle) 3 1 2 4 3 4 6 7 5 7 Thread for one-needle three-thread overlock stitch (left needle) 3 1 2 4 3 4 6 7 5 7 13 - Brother International 4234DT | Users Manual - English and Spanish - Page 18
overlock stitch (left needle) 3 1 2 4 3 4 6 7 5 7 14 0 8 9 7 5 6 0 9 8 6 7 1. Open the front cover by sliding to the right and guiding to front. 3. Pass the thread through the thread guide 3 on the top of machine. 4. Pass the thread through the tension disc 4 which is - Brother International 4234DT | Users Manual - English and Spanish - Page 19
English 5. Guide the thread down the channel and pass the thread through the threading the lower looper, make sure that the lower looper re-threading is done exactly as diagrammed. The machine will not operate properly if the threading is not done in the proper sequence. CAUTION Thread the needles - Brother International 4234DT | Users Manual - English and Spanish - Page 20
8 76 8 9 6 7 1. Open the front cover by sliding to the right and guiding the top toward you. 2. Pull the thread off the spool and directly up through the back to front. 3. Pass the thread through the thread guide 3 on the top of machine. 4. Pass the thread through the tension disc 4 which is - Brother International 4234DT | Users Manual - English and Spanish - Page 21
switch to the right until it is aligned to the "R" mark on the machine. 2. Run the thread in the sequence illustrated, following the yellow color and is in the channel next to the yellow tension adjustment dial. c) Guide the thread down the channel and across through the threading points 5 - Brother International 4234DT | Users Manual - English and Spanish - Page 22
disk 4 all the way. NOTE: Make sure that the thread passes the notch of the thread guide 3. 4. Lower the needle threader lever 6 on the left side of the machine as much as possible. 6 The thread passes through the eye of the needle. 5. Release the needle threader lever 6. 6. Carefully pull the - Brother International 4234DT | Users Manual - English and Spanish - Page 23
#60 - 80 SCHMETZ 130/705H #80 SCHMETZ 130/705H #80 #90 Medium materials: Broad cloth Narrow over lock/Rolled hemming stitch R - 2.0 Heavy materials: Tweed Denim Knits Overlock stitch 3.0 - 4.0 Needle thread : Spun #60 - 80 Filament #60 - 80 Looper thread : Woolly nylon thread Spun #60 - 80 - Brother International 4234DT | Users Manual - English and Spanish - Page 24
to medium materials. NOTE: Remove the left needle when sewing this overlock stitch. Narrow overlock stitch 2.0mm (5/64 inch) and Rolled hemming stitch 2.0mm (5/64 inch) Use as decorative or finishing stitch. See "Narrow overlock/Rolled hemming stitch" in this chapter for details. NOTE: You can use - Brother International 4234DT | Users Manual - English and Spanish - Page 25
10cm (4 inches). The threads will entwine themselves into a chain automatically. 3 2 1 1 Presser foot 2 Upper knife 3 Seam Allowance Guide To remove work When the seam is finished, keep the machine running at a low speed to obtain chaining-off. Then cut the stitches 5 cm (2 inches) from the work - Brother International 4234DT | Users Manual - English and Spanish - Page 26
thread unpicked from chain. At the end of a stitch 1. At the end of the seam, sew one stitch out of the fabric before stopping the machine. 2. Insert the chain into the end of the seam, using a hand sewing needle with large eye. 2. Raise the presser foot and the needles, then reverse - Brother International 4234DT | Users Manual - English and Spanish - Page 27
English If threads break during sewing Remove the material and re-thread in the correct order, Lower looper, Upper looper, right needle and then the left needle (to re-thread, see CHAPTER 3 "Threading"). Replace the material under the presser foot and sew 3-5 cm (1-1/8 to 2 inches) over the - Brother International 4234DT | Users Manual - English and Spanish - Page 28
on the hand wheel is aligned to the " TC " mark on the machine. TC 3. Hold the thread change assembly 1 with your fingertips tightly so the upper looper. Setting of the looper has finished. Chart of two-thread overlock stitch Stitch length 3 Stitch width 5 - 7 Stitch finger Install Thread - Brother International 4234DT | Users Manual - English and Spanish - Page 29
the left needle and using the 3-thread overlock stitch. Instructions for both narrow overlock/ Rolled hemming stitches CAUTION Turn off the main power , threads, and needles comparison chart". 2. Thread the machine for a three thread overlock, using the right needle. 3. Remove the stitch finger - Brother International 4234DT | Users Manual - English and Spanish - Page 30
Stitch Style Chart of narrow overlock/ Rolled hemming stitch Rolled hemming stitch Underside of material Narrow overlock stitch Underside of material Materials Top of material See CHAPTER 4 "Sewing materials, threads, and needles comparison chart". Top of material See CHAPTER 4 "Sewing - Brother International 4234DT | Users Manual - English and Spanish - Page 31
English CHAPTER 6 TROUBLESHOOTING This sewing machine is designed for trouble-free operation. However, the following chart indicates trouble which may occur if basic adjustments are not made properly. Trouble 1. Does not feed 2. Needles break 3. Threads break 4. Skipped stitches 5. Stitches are - Brother International 4234DT | Users Manual - English and Spanish - Page 32
dust, trimmed fabric and thread with the included cleaning brush. Oiling For smooth and silent operation, the moving parts (indicated with arrows) of the machine should be oiled periodically. CAUTION Turn off the machine before opening the front cover and oiling. NOTE: Be sure to oil your sewing - Brother International 4234DT | Users Manual - English and Spanish - Page 33
off the machine while replacing the presser foot. Blind stitch foot Features When using the blind stitch presser foot (multi purpose foot), you can sew blind stitches and overlock at the same time. This is ideal when sewing cuffs, trouser bottoms, pockets, and hemming skirts etc. The stitch guide on - Brother International 4234DT | Users Manual - English and Spanish - Page 34
foot (see CHAPTER 1 "Attaching/Removing presser foot"). 2. Set up the machine for narrow overlock stitching. (Refer to CHAPTER 5 "Narrow overlock/Rolled hemming stitch".) 3. Draw equally spaced lines on the fabric with a fabric pencil as guides for pin tuck placement. Fold the fabric along one of - Brother International 4234DT | Users Manual - English and Spanish - Page 35
necklines, etc. - 2 needle 4 thread overlock - 1 needle 3 thread overlock (Either needle can be used.) How to set the wheel is aligned to the line on the machine (see CHAPTER 1 "Turning direction of hand wheel"). 4. Flip open the tape guide 1, then set the presser adjusting dial 2 at - Brother International 4234DT | Users Manual - English and Spanish - Page 36
foot (see CHAPTER 1 "Attaching/ Removing presser foot"). 3. Set up the machine for 3 thread overlock stitch with one needle in the left position. The right needle should be the pearl comes through the tunnel. 2. Sew at slow speed while guiding the strand of pearls and fabric by hand. 3. Tie both ends - Brother International 4234DT | Users Manual - English and Spanish - Page 37
Machine setting (type of stitch): - 2 needle 4 thread overlock - 1 needle 3 thread overlock (the right needle should be removed) How to adjust the machine groove of piping foot and start sewing. Start sewing 1. Carefully guide the fabric and piping tape by hands during sewing. 2. Turn both - Brother International 4234DT | Users Manual - English and Spanish - Page 38
the gathering foot (see CHAPTER 1 "Attaching/ Removing presser foot"). Machine setting (type of stitch): LG 4. Adjust the other settings to those used during normal overlock sewing. 5. Sew while keeping the fabric aligned with the fabric guide 3. - Adjust the size of the gathers by setting the - Brother International 4234DT | Users Manual - English and Spanish - Page 39
/64 inch) Needle SCHMETZ 130/705H No. of needles and threads Two/Three/Four threads convertible Two needles or single needle Machine net weight 6 kgs. Machine dimensions 33.5 cm (W) x 29.8 cm (H) x 27.9 cm (D) (Approx. 13-2/5 (W) x 11-24/25 (H) x 11-4/25 (D) inches) Needle set SCHMETZ 130/705H. #80 - Brother International 4234DT | Users Manual - English and Spanish - Page 40
quina de la toma de corriente cuando vaya a quitar alguna tapa, lubricar o cuando vaya a realizar cualquier tipo de ajuste de mantenimiento indicado en este manual de instrucciones. 16.Esta máquina de coser no ha sido diseñada para ser utilizada por niños o personas enfermas sin la supervisión de un - Brother International 4234DT | Users Manual - English and Spanish - Page 41
dañar la carcasa y la máquina, por lo que nunca se deben usar. 3. No deje caer ni golpee la máquina. 4. Consulte siempre este manual antes de cambiar o ajustar el prensatelas, la aguja o cualquier otro elemento para asegurarse de que se ajustan correctamente. Para reparar o ajustar la máquina Si - Brother International 4234DT | Users Manual - English and Spanish - Page 42
ENHORABUENA POR HABER ELEGIDO ESTA COMPACTA MAQUINA OVERLOCK Su máquina es de una eficacia y calidad excelentes; así pues, a fin de disfrutar completamente de todas las características incorporadas, le sugerimos que lea cuidadosamente el manual. Si necesitara mayor información sobre el uso de esta - Brother International 4234DT | Users Manual - English and Spanish - Page 43
23 Para coser tejidos finos ...23 Para utilizar la uñeta de puntadas W 23 Puntada de dos hilos ...24 Puntada overlock estrecha/de dobladillo enrollado 25 Tabla de puntada overlock estrecha/de dobladillo enrollado 26 Capítulo 6: Guía de localización de problemas 27 Capítulo 7: Mantenimiento ...28 - Brother International 4234DT | Users Manual - English and Spanish - Page 44
2 Compartimiento del suplemento para la mesa Las uñetas de puntadas pueden guardarse en este compartimiento. (Véase el CAPÍTULO 5 "Puntada overlock estrecha/de dobladillo enrollada". Uñeta de puntadas, Uñeta de puntadas W * Aberturas de ventilación de la parte trasera y de los lados - Brother International 4234DT | Users Manual - English and Spanish - Page 45
Español Accesorios Accesorios incluidos 1 Funda: X77871000 2 Bolsa de accesorios: 122991052 3 Pinzas: XB1618001 4 Malla para hilo (4): X75904000 5 Tope del carrete (4): X77260000 6 Cepillo limpiador: X75906001 7 Llave hexagonal: XB0393001 8 Juego de agujas (SCHMETZ 130/705H): X75917001 n° 80: 2 - Brother International 4234DT | Users Manual - English and Spanish - Page 46
Encendido de la máquina Activación de la máquina 1. Introduzca el enchufe de tres puntas en la conexión que se encuentra en el lado inferior derecho de la máquina. Inserte el enchufe de alimentación en una toma de corriente. 2. Coloque el interruptor de alimentación principal y de luz en la - Brother International 4234DT | Users Manual - English and Spanish - Page 47
Orificio de corte El orificio de corte opcional sostiene el hilo y el tejido cortado generados al coser. NOTA: Asegúrese de no perder el suplemento para la mesa extraído. 2. Coloque el tejido y comience a coser (véase el CAPÍTULO 5). Español Para instalar: Inserte el orificio de - Brother International 4234DT | Users Manual - English and Spanish - Page 48
la puntada a un máximo de 4 mm. Marca de selección Ancho de las puntadas El ajuste normal del ancho de puntada para una puntada overlock corriente es de 5 mm. Para cambiar el ancho de puntada, gire el disco de ajuste del ancho de las puntadas. 1 3. Repliegue la cuchilla completamente - Brother International 4234DT | Users Manual - English and Spanish - Page 49
Español Alimentador con diferencial Esta máquina de coser está provista de dos series de alimentadores debajo del prensatelas para guiar el tejido por la máquina. El alimentador con diferencial controla los movimientos de los alimentadores delanteros y traseros. Al ajustarlo en 1, los - Brother International 4234DT | Users Manual - English and Spanish - Page 50
Disco de ajuste de la tensión Existe un disco de tensión para el hilo de cada aguja, el hilo del áncora superior y el del áncora inferior. La tensión de hilo correcta puede variar dependiendo del tipo y grosor del tejido así como del tipo de hilo utilizado. Ajustes de tensión del hilo pueden - Brother International 4234DT | Users Manual - English and Spanish - Page 51
Tabla de ajuste de tensión de los hilos, dos agujas (cuatro hilos) A: Revés B: Derecho C: Hilo de la aguja izquierda D: Hilo de la aguja derecha E: Hilo del áncora superior F: Hilo del áncora inferior A C B El hilo de la aguja izquierda está suelto. Tense el hilo de la aguja izquierda ( - Brother International 4234DT | Users Manual - English and Spanish - Page 52
Tabla de ajuste de tensión de los hilos, una aguja (tres hilos) A: Revés B: Derecho C: Hilo de las agujas D: Hilo del áncora superior E: Hilo del áncora inferior C A C B E El hilo de la aguja está suelto. Tense el hilo de la aguja (amarillo o verde). A D B El hilo de la aguja está tenso. - Brother International 4234DT | Users Manual - English and Spanish - Page 53
Aguja Está máquina funciona con una aguja normal para máquinas de coser domésticas. Se recomienda el uso de una aguja SCHMETZ 130/705H (n° 80 o n° 90). Descripción de la aguja 1 Parte trasera (lado plano) 2 Parte delantera 3 Canal 1 2 3 Cómo comprobar la aguja 4 Superficie plana 5 Coloque la - Brother International 4234DT | Users Manual - English and Spanish - Page 54
CAPÍTULO 2 PREPARACIÓN ANTES DEL ENHEBRADO Árbol del hilo Levante el árbol telescópico del hilo hasta su posición más alta. Compruebe que los portahilos quedan alineados sobre los portabobinas como se ilustra a continuación. 1 Portahilos en el árbol del hilo 2 Portabobinas 3 Posición correcta - Brother International 4234DT | Users Manual - English and Spanish - Page 55
agujas y cuatro hilos 3 4 laegufjat nizqeueiedrdlae argiugjaht dneereechdale 1 2 3 4 6 7 5 7 Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja derecha) 3 1 2 4 3 4 6 7 5 7 Español Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja izquierda - Brother International 4234DT | Users Manual - English and Spanish - Page 56
, observando el color azul y los números inscritos al lado de cada punto de enhebrado. 1 2 3 4 3 4 Enhebrado para puntadas Overlock de una aguja y dos hilos (aguja izquierda) 3 1 2 4 3 4 6 7 5 7 14 0 8 9 7 5 6 0 9 8 6 7 1. Abra la tapa delantera deslizándola hacia la - Brother International 4234DT | Users Manual - English and Spanish - Page 57
Español 5. Guíe el hilo por el canal y pase el hilo por los puntos de enhebrado 5678 situados al lado de las marcas de color azul siguiendo el orden numérico de la ilustración. NOTA: Asegúrese de enhebrar ambas tomas de hilo 7. Continúe con "Proceso simple de enhebrado del áncora inferior". Proceso - Brother International 4234DT | Users Manual - English and Spanish - Page 58
Enhebrado del áncora superior Enhebre el hilo según lo ilustrado en la secuencia, observando el color rosa y los números inscritos al lado de cada punto de enhebrado. 1 2 3 4 3 5. Guíe el hilo por el canal y pase el hilo por los puntos de enhebrado 5678 al lado de las marcas de color rosa - Brother International 4234DT | Users Manual - English and Spanish - Page 59
Español PRECAUCIÓN · Antes del enhebrado apague la máquina por seguridad. · Gire la ruedecilla de forma que la marca de la misma quede alineada con la línea de la máquina (Véase el CAPÍTULO 1 "Cambio de la dirección de la ruedecilla"). Enhebrado de la aguja izquierda 1. Deslice el interruptor de - Brother International 4234DT | Users Manual - English and Spanish - Page 60
Enhebrado de la aguja (utilizando el enhebrador de aguja) La aguja puede enhebrarse de la aguja mediante operación de un toque utilizando el enhebrador de aguja. 1. Baje la palanca del prensatelas 1 para bajar el prensatelas. 1 2. Tire del extremo del hilo, pasado a través de la guía de hilo de la - Brother International 4234DT | Users Manual - English and Spanish - Page 61
, HILOS Y AGUJAS DE COSTURA Tejido Tejidos finos: Georgette Lino Organdí Tricot Puntada Largo de las puntadas (mm) Hilo Aguja Puntada overlock 2,0 - 3,0 Hilo de hilvanar n° 80 - 90 Algodón n° 100 Filamento n° 80 - 100 SCHMETZ 130/705H n° 80 Tejidos finos: Georgette Lino Organdí Tricot - Brother International 4234DT | Users Manual - English and Spanish - Page 62
aguja y dos hilos> · Ajuste de la tensión del hilo de la aguja a "2". · Ajuste de la tensión del hilo del áncora inferior a "6". (Véase "Tabla de puntada Overlock de dos hilos" de este capítulo para los detalles.) 2. Enhebre la máquina y saque todos los hilos unos 15 cm detrás del prensatelas. 20 - Brother International 4234DT | Users Manual - English and Spanish - Page 63
3. Coloque un trozo de tejido debajo del prensatelas para realizar la costura de prueba. NOTA: Levante siempre el prensatelas antes de colocar el tejido debajo. No puede comenzar a coser simplemente colocando el tejido debajo del prensatelas sin elevarlo. Para empezar a coser 1. Enhebre la máquina - Brother International 4234DT | Users Manual - English and Spanish - Page 64
, cosa una puntada fuera del tejido antes de detener la máquina. 2. Inserte la cadeneta en el final de la costura con una aguja de costura manual con un ojo grande. 2. Levante el prensatelas y las agujas, y dé la vuelta al tejido. 3. Remate la cadeneta con una gota de pegamento para tela y corte - Brother International 4234DT | Users Manual - English and Spanish - Page 65
Español Si los hilos se rompen al coser Quite el tejido y vuelva a enhebrar en el orden correcto: Áncora inferior, áncora superior, aguja derecha y aguja izquierda (para volver a enhebrar, véase el CAPÍTULO 3 "Enhebrado"). Sustituya el tejido colocado bajo el prensatelas y cosa 3-5 cm sobre las - Brother International 4234DT | Users Manual - English and Spanish - Page 66
áncora superior 4. Asegúrese de que la punta esté en el ojo del áncora superior. El ajuste del áncora ha finalizado. Tabla de puntada Overlock de dos hilos Largo de puntada 3 Ancho de puntada 5 - 7 Uñeta de puntadas Instalar Tensión del hilo Hilo de la aguja izquierda Para tejidos finos - Brother International 4234DT | Users Manual - English and Spanish - Page 67
puntadas W dentro del suplemento para la mesa. NOTA: Asegúrese siempre de instalar una uñeta de puntadas antes de coser con puntadas Overlock normales. 5. Ajuste el ancho de las puntadas con el disco de ajuste hasta la posición "R". NOTA: Para obtener información sobre la aguja y el - Brother International 4234DT | Users Manual - English and Spanish - Page 68
estrecha/de dobladillo enrollado Estilo de puntada Puntada de dobladillo enrollado Parte inferior del tejido Puntada overlock estrecha Parte inferior del tejido Tejidos Parte superior del tejido Véase el CAPÍTULO 4 "Tabla de relación entre los distintos tejidos, hilos y agujas de costura - Brother International 4234DT | Users Manual - English and Spanish - Page 69
Español CAPÍTULO 6 GUÍA DE LOCALIZACIÓN DE PROBLEMAS Esta máquina de coser ha sido concebida para un funcionamiento sin problemas. Sin embargo, la siguiente tabla le indica los problemas que podrían presentarse si los ajustes básicos no fueron realizados correctamente. Problema Causa Remedio - Brother International 4234DT | Users Manual - English and Spanish - Page 70
CAPÍTULO 7 MANTENIMIENTO Limpieza PRECAUCIÓN Apague la máquina antes de limpiarla. Gire la ruedecilla para mover las agujas hacia abajo. Limpie periódicamente el polvo, los restos de tejido y los hilos con el cepillo limpiador que se incluye. Engrasado Para conseguir un funcionamiento suave y - Brother International 4234DT | Users Manual - English and Spanish - Page 71
que coordine con el tejido. Si se hace correctamente, esta puntada apenas se verá en el derecho del tejido. Puntadas overlock planas Las puntadas overlock planas se usan principalmente para lograr un acabado decorativo en un trabajo. Una vez terminadas, las puntadas pueden parecerse a una escalera - Brother International 4234DT | Users Manual - English and Spanish - Page 72
Procedimiento 1. Conecte el prensatelas para puntadas invisibles (véase el CAPÍTULO 1 "Instalación/ desmontaje del prensatelas"). 2. Ajuste la máquina para puntada overlock de 3 hilos con una aguja en la posición izquierda. La aguja de la derecha se debe quitar. 3. Doble el tejido como se muestra en - Brother International 4234DT | Users Manual - English and Spanish - Page 73
en prendas de punto. Además la fijación de elásticos es conveniente para coser puños de camisas, escotes, etc. - overlock de 2 agujas y 4 hilos - overlock de 1 aguja y 3 hilos (se puede utilizar cualquier aguja) Como ajustar la cinta o el elástico 14 5 2 3 1. Conecte el prensatelas para - Brother International 4234DT | Users Manual - English and Spanish - Page 74
la cuchilla"). 2. Conecte el prensatelas para tira de perlas (véase el CAPÍTULO 1 "Instalación/ desmontaje del prensatelas"). 3. Ajuste la máquina para puntada overlock de 3 hilos con una aguja en la posición izquierda. La aguja de la derecha se debe quitar. 32 1 ~ 1.5mm 2 1 3 1. Doblar el tejido - Brother International 4234DT | Users Manual - English and Spanish - Page 75
de las puntadas a 3 mm. (posición estándar) 2. Ajuste el ancho de las puntadas de 5 a 6 mm 3. Ajuste la tensión de los hilos para puntadas overlock normales (véase el CAPÍTULO 5 "Selección de las distintas puntadas"). 3mm 3mm Cómo ajustar el tejido y la cinta de ribetear 3cm 2 1 1 Superficie - Brother International 4234DT | Users Manual - English and Spanish - Page 76
ón/desmontaje del prensatelas"). Ajuste de la máquina (tipo de puntada): LG 4. Ajuste los demás parámetros a los que utiliza durante la costura overlock normal. 5. Cosa manteniendo el tejido alineado con la guía del tejido 3. - Cambie el tamaño de los frunces ajustando el largo de las puntadas - Brother International 4234DT | Users Manual - English and Spanish - Page 77
Español ESPECIFICACIONES Especificaciones Uso Tejidos finos a gruesos Velocidad de costura 1.300 puntadas por minuto como máximo Ancho de las puntadas 2,3 mm a 7 mm Largo de las puntadas (altura) 2 mm a 4 mm Movimiento de la barra de las agujas 25 mm Prensatelas Tipo de prensatelas libre Elevación - Brother International 4234DT | Users Manual - English and Spanish - Page 78
36 - Brother International 4234DT | Users Manual - English and Spanish - Page 79
SETTING RECORD / NOTAS DE AJUSTES FABRIC TEJIDO THREAD HILO NEEDLE AGUJA THREAD TENSION TENSION DE HILO left right upper- lowerneedle needle looper looper aguja aguja áncora áncora izquier- derecha superior inferior da NOTE NOTA STITCH TYPE Tipo de puntada 37 - Brother International 4234DT | Users Manual - English and Spanish - Page 80
XB2006001 Printed in Taiwan
HANDBOOK FOR COMPACT
OVERLOCK MACHINE
MANUAL DE INSTRUCCIONES DE LA
MAQUINA COMPACTA OVERLOCK
English
Español
Product Code: 884-B01
Please visit us at
where you can get product support and answers to
frequently asked questions (FAQs).
Visítenos en
donde hallará consejos para la solución de problemas
así como la lista de preguntas y respuestas más
frecuentes.