Brother International BAS-300G Basic Instruction Manual - English - Page 12
Table processing diagram, <For BAS-311G and 326G>, <For BAS-300G>
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. INSTALLATION 3-1. Table processing diagram • The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the sewing machine. • If the distance A between the insides of the legs is less than 740 mm, move the control box installation position to the left (B = 261mm). • Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together, it may result in incorrect sewing machine operation. Only the holes for installing the operation panel and the hole for the cord differ from the above diagram. Refer to the diagram above for all other dimensions. * The operation panel can be moved to any preferred position as long as it is in a position where the cord reaches the PCB inside the control box. 3000B (Reference position) 3003B 4 BAS-300G, BAS-311G, BAS-326G