Brother International BAS-300G Basic Instruction Manual - English - Page 14
Installing the machine head, of the pulse motor.
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. INSTALLATION 3-4. Installing the machine head Pulse motor Approx. 20 mm Approx. 20 mm (1) Pins [2 pcs.] (2) Set screws [2 pcs.] (3) Hinge rubber assemblies [2 pcs.] Place the machine head gently on top of the oil pan and the rubber cushions. NOTE: • Be careful not to get the cords clamped between the machine head and the oil pan. • When holding the machine head, do not hold it by the pulse motor. This may cause problems with operation of the pulse motor. 2966B (4) Hinge holders [2 pcs.] (5) Bolts [4 pcs.] (6) Plain washers [4 pcs.] (7) Nuts [4 pcs.] (8) Head rest (9) Bolts with washer [4 pcs.] 4913Q 6 BAS-300G, BAS-311G, BAS-326G
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
6
3-4. Installing the machine head
(1) Pins [2 pcs.]
(2) Set screws [2 pcs.]
(3)
Hinge rubber assemblies [2 pcs.]
Place the machine head gently on top of
the oil pan and the rubber cushions.
NOTE:
•
Be careful not to get the cords
clamped between the machine head
and the oil pan.
•
When holding the machine head, do
not hold it by the pulse motor. This
may cause problems with operation
of the pulse motor.
(4)
Hinge holders [2 pcs.]
(5) Bolts [4 pcs.]
(6) Plain washers [4 pcs.]
(7) Nuts [4 pcs.]
(8) Head rest
(9)
Bolts with washer [4 pcs.]
2966B
Pulse motor
Approx. 20 mm
4913Q
Approx. 20 mm