Brother International BAS-300G Basic Instruction Manual - English - Page 23
Connecting the power cord, 3-12. Installing the cotton stand, with correct operation.
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3-11. Connecting the power cord 3. INSTALLATION 1. Attach an appropriate plug to the power cord (1). (The green and yellow wire is the ground wire.) 2. Insert the plug into a properly-grounded AC power supply. * The inside of the control box uses single-phase power. NOTE: Do not use an extension cord. If this is not observed, it may cause problems with correct operation. Green and yellow wire (ground wire) Green and yellow wire (ground wire) 3-12. Installing the cotton stand 5239Q (1) Cotton stand NOTE: Fit the washer (2), and then securely tighten the nut (3) so that the cotton stand does not move. 2974B BAS-300G, BAS-311G, BAS-326G 15
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
15
3-11. Connecting the power cord
1. Attach an appropriate plug to the
power cord (1). (The green and yellow
wire is the ground wire.)
2. Insert
the
plug
into
a
properly-grounded AC power supply.
* The inside of the control box uses
single-phase power.
NOTE:
Do not use an extension cord. If this is
not observed, it may cause problems
with correct operation.
3-12. Installing the cotton stand
(1) Cotton stand
NOTE:
Fit the washer (2), and then securely
tighten the nut (3) so that the cotton
stand does not move.
<Three-phase
specifications
>
<Single-phase
specifications
>
Green and yellow wire
(ground wire)
5239Q
Green and yellow wire
(ground wire)
2974B