Brother International BAS-300G Basic Instruction Manual - English - Page 41
Sewing, Warning, Caution
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. SEWING 6. SEWING WARNING Do not allow any liquids to get onto this sewing machine, otherwise fire, electric shocks or operating problems may occur. If any liquid gets inside the sewing machine (machine head or control box), immediately turn off the power and disconnect the power plug from the electrical outlet, and then contact the place of purchase or a qualified technician. CAUTION Turn off the power switch at the following times. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. • When threading the needle • When replacing the bobbin and needle • When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 6-1. Sewing 4978Q 1. Turn on the power switch. 2. Press the or key (1) to select the sewing program number that you would like to use. * Refer to "5-2. Loading sewing data" for details on reading sewing data from a CF card. 1st step 2nd step 4441Q 3. Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, lower the work clamp before depressing the start switch (2).) • The feed mechanism will move to the home position. 4979Q 4. Place the article to be sewn underneath the work clamp (3). 5. Depress the foot switch to the 1st step. (If using a two-pedal foot switch, depress the work clamp switch (4).) • The work clamp (3) will drop. 6. Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, depress the start switch (2).) • The sewing machine will start sewing. 7. When sewing is complete, the thread will be trimmed and the work clamp (3) will rise. 2996B Use a work clamp that hold the article being sewn firmly, without allowing it to slip. If using the standard work clamp and feed plate and the article being sewn is slipping, take measures to stop the work clamp and feed plate from being slippery. BAS-300G, BAS-311G, BAS-326G 33