Brother International BAS-300G Basic Instruction Manual - English - Page 36

Setting the X-scale and Y-scale, 5-5. Setting the sewing speed

Get Brother International BAS-300G PDF manuals and user guides View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-4. Setting the X-scale and Y-scale 2nd step 4955Q The scales are set to 100 (%) at the time of shipment from the factory. 1. Press the SELECT key (1) so that the X-SCALE indicator (2) (for X-scale setting) or the Y-SCALE indicator (3) (for Y-scale setting) is illuminated. • The setting value (%) will appear in the menu display (4). * When memory switch no. 402 is set to "ON", the settings will be displayed in units of mm. 2. Press the or key (5) to set the scale (0 − 400). • The program number will flash in the PROGRAM No. display (6). 3. Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, lower the work clamp before depressing the start switch.) • The feed mechanism will move to the home position and the scale will be accepted. • The program number will stop flashing and illuminate steadily. NOTE: After completing the setting, be sure to refer to "5-6. Checking the sewing pattern" to check that the needle drop position is correct. 5-5. Setting the sewing speed The sewing speed is set to 2000 (sti/min) at the time of shipment from the factory. 1. Press the SELECT key (1) until the SPEED indicator (2) illuminates. • The setting value (sti/min) will appear in the menu display (3). 2. Press the or key (4) to set the sewing speed. (Sewing speed setting: 400 − 2700) 4956Q 28 BAS-300G, BAS-311G, BAS-326G

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
BAS-300G, BAS-311G, BAS-326G
28
5-4. Setting the X-scale and Y-scale
The scales are set to 100 (%) at the time of shipment from
the factory.
1. Press the SELECT key (1) so that the X-SCALE
indicator (2) (for X-scale setting) or the Y-SCALE
indicator (3) (for Y-scale setting) is illuminated.
•
The setting value (%) will appear in the menu display
(4).
* When memory switch no. 402 is set to "ON", the
settings will be displayed in units of mm.
2. Press the
or
key (5) to set the scale (0
−
400).
•
The program number will flash in the PROGRAM No.
display (6).
3. Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp
before depressing the start switch.)
•
The feed mechanism will move to the home position
and the scale will be accepted.
•
The program number will stop flashing and illuminate
steadily.
NOTE:
After completing the setting, be sure to refer to "5-6.
Checking the sewing pattern" to check that the needle
drop position is correct.
5-5. Setting the sewing speed
The sewing speed is set to 2000 (sti/min) at the time of
shipment from the factory.
1. Press the SELECT key (1) until the SPEED indicator (2)
illuminates.
•
The setting value (sti/min) will appear in the menu
display (3).
2. Press the
or
key (4) to set the sewing speed.
(Sewing speed setting: 400
−
2700)
4955Q
2nd step
4956Q