Brother International BAS-612 Instruction Manual - English - Page 17
Thread, Trimmer, Lower, Upper, Carriage, Forward, Automatic, Manual, Program, Change, Cycle
View all Brother International BAS-612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
< Holding the needle threads and the bobbin threads> • Insert the bobbin case (bobbin) into the rotary hook and close the handle. 1. Hold the needle thread by hand, and turn the pulley by hand to bring the bobbin thread up. 2. Set THREAD TRIMMER switch 0 to UPPER to lower the needle thread trimmer knife. Bobbin thread Note: Be careful to keep your hands and other articles away from the knife when it lowers. 3. Thread the two needle threads over the needle thread trimmer knife. 4. Return THREAD TRIMMER switch 0 to raise the needle thread trimmer knife and hold the needle threads. 5. Set THREAD TRIMMER switch 0 to LOWER to turn the bobbin thread knife as illustrated. 6. Insert the threads into the grooves in the needle plate and reset THREAD TRIMMER THREAD TRIMMER switch 0 to cut and hold the bobbin threads O with the bobbin thread knives. 0 • aat Needle O thread THREAD TRIMMER LOWER UPPER LOWER °09\ {To return the carriage feed} 1 Return the slide plates. 2. Set CARRIAGE FEED switch 0 to BACKWARD to return the carriage feed. * To fast-return the carriage feed to the home position, set MODE selector 0 MANUAL. to any position but CARRIAGE FEED FORWARD MODE AUTOMATIC MANUAL • PROGRAM • KNFE CHANGE CYCLE PGM. -13-