Brother International BAS-612 Instruction Manual - English - Page 18
Treadle, Start, Switch
View all Brother International BAS-612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TREADLE AND START SWITCH • When running a flap program, the machine will not operate on pressing the start switch unless the flap presser lowers. • For standard sewing, the machine will operate on pressing the start switch after the folding plate has operated. • Set the MODE selector either to AUTOMATIC or to MANUAL. 1. Press treadle 0 backwards to raise padding cloth presser foot springs R 0 and L 0 . 2. Release treadle 0 to lower padding cloth presser foot springs R 0 and L 0 . 3. Press treadle forward to position to lower carriage feed arm L 0 . 4. Press treadle 0 forward to position eft to lower carriage feed arm R 0 . 5. Press treadle 0 forward to position Q to lower binder 0 and operate the folding plate. * The folding plate will start to operate 0.25 to 0.35 seconds after binder 0 lowers. 6. Press treadle forward to position 0 to lower flap presser L 0 7. Press treadle forward to position 0 to lower flap presser R Q 8. Press START switch 0 to operate the carriage feed. * If the MODE selector is set to MANUAL, the carriage feed will operate without actual sewing. * The sequence of carriage feed and flap presser operations (steps 3, 4, 6 and 7 above) can be changed by dip switch setting (see page 46). . 0 00 0 Neutral 1 2 3 BAS -610 B A S -611 • 612 -0 00 0 -14-