Brother International BAS-612 Instruction Manual - English - Page 21
program>
View all Brother International BAS-612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PROGRAMMING (Inputting a Standard Sewing Program) • Set the MODE selector to PROGRAM. The PROGRAMMING NUMBER and SEAM LENGTH indicators will flash. • Flap sewing is selected if F- H or F- E is displayed. To change the seam length of programming number 1 from 100 to 125: 1. Set MODE selector 0 to PROGRAM. 2. Press SELECT selector 0 and illuminate program number indicator "V. 3. Input the seam length of the standard sewing program. Press setters 0 and change the seam length display from 100 to 125. 4. Set MODE selector 0 to any position but PROGRAM. * The modified program will be stored when the MODE selector is moved. The programs will remain unmodified if the power switch is set to OFF without moving the selector. 5. Set MODE selector 0 to AUTOMATIC to sew. Program 7 100 125 MODE r`s-A,diPNRUOMGBREARMMING AUTOMATIC • MANUAL • PROGRAM 12 345 00000 SELECT -SET--CLEAR- • KNIFE CHANGE & CYCLE PGM. "UM -CYCLE RCM.- °SEAM BOBBIN `-'LENGTH COUNTER SET IInsnm ) M/M S E SET 0 MODE I AUTOMATIC MANUAL • PROGRAM • KNIFE CHANGE & CYCLE PGM. PROGRAMMING NUMBER 1 2 3 4 5 00000 SELECT - SET - CLEARi -CYCLE PGM. nSEAM tgLENGTH BOBBIN COUNTER SET I 1 I C M/M S < E SET -17-