Brother International BAS-612 Instruction Manual - English - Page 28

PROGRAM CHECKING • The carriage feed can be moved to check the sewing program without actual sewing. 1. Set MODE selector 0 to MANUAL. 2. Select a program from 1 to 5 by illuminating the number by SELECT selector 0 . To operate the stacker, set STACKER switch Q to ON. If stacker operation is not required, set STACKER switch 0 to OFF. 3. Position the material. 4. Press START switch 0 . The carriage feed will move to the sewing start position. 5. Press START switch 0 again. The carriage feed will move to the end point of the condensed seam (stitch length is shortened) or backstitch seam. 6. Continue to press START switch 0 to move the carriage feed to the next step. * The carriage feed will move to the corner knife position if START switch 0 is pressed for the fifth time in the case of condensed stitch sewing or for the seventh time in the case of backstitch sewing. 7. The carriage feed, flap presser and binder rise and the stacker will operate. The stacker will not operate if STACKER switch () is set to OFF. 8. Press START switch again. The carriage feed will return to the home position. * The carriage feed will return to the home position if EMERGENCY STOP switch 0 is pressed at steps 5 to 7 with the carriage feed at halt. 0 MODE et,PROGRAMMING II, NUMBER • AUTOMATIC • MANUAL • PROGRAM 12 34 5 0 0 0 © ©I SELECT - SET - CLEAR • KNIFE CHANGE & CYCLE PGM. -CYCLE PGM.-1 O I EMERGENCY STOP STACKER ON BOBBIN COUNTER SET OFF IL> -24-