Brother International BAS-612 Instruction Manual - English - Page 45

0 00 . To replace the knife bracket unit: 1 11 O 1. Set MODE selector 0 to KNIFE CHANGE. 2. Loosen screws by half a turn. 3. Press the EMERGENCY STOP switch twice. The corner knife will rise above the table. 4. Close the air supply and replace knife bracket unit Q * Be careful not to loosen the screws too far, otherwise the knife bracket unit will come into contact with slide guide 0 . To fit the knives: 1. Loosen screws and move knives S in the arrowed directions; fit the knives according to the sewing pattern. 2. A maximum deviation of 4 mm can be set. 3. Finely adjust the distances to the seams by changing the angles of the knives secured by set screws 0 . L Corner knife L Corner knife Corner knife bracket unit Corner knife types (knife bracket units are available as optional parts) Size Corner knife bracket unit LR Corner knife LL SR Corner knife SL Ceramic L corner knife S 8 10 12 14 16 18 S15881-001 S15882-001 S15883-001 S15884-001 S15885-001 S15886-001 SO9416-001 S09417-001 S08322-001 W8302-001 S14051-001 S14050-001 20 S15887-001 -41-