Brother International BES-1240BC Instruction Manual - English - Page 139
Hoop position fine adjustment, Embroidering is allowed within the green guide in the hoop.
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Chapter 6 Embroidering Grid Displays 1 x 1 cm square grids on the background. 1. Select [Grid] from View menu and put the check mark. Before selecting After selecting Hoop Displays the outline of embroidery hoop. The type of embroidery hoop can be changed in [Load Hoop] of Settings menu. Embroidering is allowed within the green guide in the hoop. 1. Select [Hoop] from the View menu and put a check mark. If the hoop is not displayed, carry out the step to read the hoop. For details, refer to [Load Hoop] ( page 174). Before selecting After selecting Hoop position fine adjustment Adjusts the view position of embroidery hoop. The position can be adjusted in the range of ±20 mm in both the X and Y directions. 1. Select [Hoop position] from the View menu. The hoop view position is stored in the hoop data. If you reinstall the program, the hoop view position is initialized because it is overwritten. BES-940BC • BES-1240BC 137