Brother International BES-1240BC Instruction Manual - English - Page 169
Thin Material or Thick Material
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Chapter 6 Embroidering Thin Material or Thick Material Adjusts the timing of needle drop and hoop movement. The value can be designated between 95 and 125 degrees in units of 1 degree. The smaller values are suitable for thick material and the larger ones are suitable for thin material. 1. Select [Thin material or thick material] from Settings menu. 2. Adjust the value by moving the slide bar control. Click [OK] when it is set. The selected value is displayed. Clicking this button will reset the value to the standard one (110). BES-940BC • BES-1240BC 167
BES-940BC • BES-1240BC
167
Chapter 6
Embroidering
Thin Material or Thick Material
Adjusts the timing of needle drop and hoop movement.
The value can be designated between 95 and 125 degrees in units of 1 degree.
The smaller values are suitable for thick material and the larger ones are suitable
for thin material.
1.
Select [Thin material or thick material] from Settings menu.
2.
Adjust the value by moving the slide bar control.
Click [OK] when it is set.
Clicking this button
will reset the value to
the standard one
(110).
The selected value
is displayed.