Brother International BES-1240BC Instruction Manual - English - Page 200
Jog Embroidering, 6. Hoop Feed Position
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Chapter 7 Operation of Machine 5. Jog Embroidering BES-940BC BES-1240BC • Jog embroidering can be used for preventing the thread from slipping from the needle at the start of embroidering. • Jog embroidering can be executed as long as the start switch at the machine head is held down. Note) Never apply a tape on the switch to keep jog operation for a long time. Doing so may cause damage to the machine. 6. Hoop Feed Position • In order to ease mounting and dismounting of the embroidery hoop, another needle position can be set as a hoop feed position in the movable area additionally to the current needle position. (The hoop feed position should be set by the personal computer.) • In order to ease material attachment while operation is suspended, the hoop can be moved to the feed position at any time by the hoop feed switch. • The hoop can also be moved to the feed position automatically after embroidering is finished. Refer to "Automatic Hoop Feed" on Page 161 for details. 198 BES-940BC • BES-1240BC