Brother International CS7130 Operation Manual - Page 26
Removing the presser foot, holder
View all Brother International CS7130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
KNOWING YOUR SEWING MACHINE 7 Raise the presser foot lever to check that the presser foot is securely attached. Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the disc-shaped screwdriver to remove the presser foot holder. 1 Remove the presser foot. (Refer to page 23.) 2 Loosen the presser foot holder screw. 1 Disc-shaped screwdriver 2 Presser foot holder 3 Presser foot holder screw ■■Attaching the presser foot holder 1 Align the presser foot holder with the lowerleft side of the presser bar. 2 3 1 Presser foot holder 2 Presser bar 1 3 Presser foot holder screw 2 Holding the presser foot holder in place, tighten the screw. Note • If the presser foot holder is not correctly installed, the thread tension will be incorrect. CAUTION • Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break. 24