Brother International CS7130 Operation Manual - Page 53
The stitch 0 has a gap.
View all Brother International CS7130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4 Select No. 59 (for making adjustments). XX The LCD goes into the stitch adjustment mode. The total number of combined characters 1 changes to "--". 5 Adjust the character stitches by pressing (stitch length adjustment key). Each press of "+" or "-" side of (stitch length adjustment key) widens or narrows the stitches. 1 No. for making adjustments 2 The stitch adjustment level 3 Widens the stitches 4 Narrows the stitches If the pattern is bunched (B) Press the "+" side of (stitch length adjustment key) to widen the stitch. If the pattern is overstretched (The stitch "0" has a gap.) (C) Press the "-" side of (stitch length adjustment key) to narrow the stitch. Memo • The stitch adjustment level can be set between -9 and 9. • The setting is saved in memory even if you turn off the machine. 6 Sew the characters "034" again. Memo • You can sew when you are in the stitch adjustment mode. If the stitch pattern still comes out poorly, adjust the stitch again. Adjust the stitch until the stitch pattern comes out correctly. 7 After you have finished adjusting the pattern, press the stitch category selection key three times. XX The display returns to the normal character stitching mode. UTILITY STITCHES 3 51