Brother International CS7130 Operation Manual - Page 54

4 APPENDIX STITCH SETTINGS Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches and mirror image stitches (for models equipped with mirror image stitches) in the following table. CAUTION • When using the twin needle, select a stitch width of 5.0 mm (3/16 inch) or less, otherwise the needle may break or the machine may be damaged. • When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. Note • The walking foot can only be used with straight or zigzag stitch patterns. Do not sew reverse stitches with the walking foot. Straight Pattern Presser Foot Twin Needle Reverse (Rev.)/ Reinforcement (Reinf.) Stitching Utility stitches Stitch Name Pattern No. Application Left Center Triple stretch stitch Stretch stitch Zigzag stitch 3-point zigzag stitch Overcasting stitch J 00 Basic stitching, sewing gathers or pintucks, etc. J 01 Attaching zippers, basic stitching, and sewing gathers or pintucks, etc. J 02 Attaching sleeves, sewing inseams, sewing stretch fabrics and decorative stitching J 03 Sewing stretch fabrics and decorative stitching J 04 Overcasting and attaching appliqués J 05 Overcasting on medium weight or stretch fabrics, attaching elastic, darning, etc. G 06 Overcasting on thin or medium weight fabrics G 07 Overcasting on thick fabrics J 08 Overcasting on stretch fabrics Blind hem stitch J 09 Overcasting on thick or stretch fabrics R 10 Blind hem stitching on medium weight fabrics R 11 Blind hem stitching on stretch fabrics Appliqué stitch J 12 Appliqué stitching Shell tuck stitch J 13 Shell tuck stitching * Select a stitch width of 5.0 mm (3/16 inch) or less. 52 Stitch Width Stitch Length [mm (inch)] [mm (inch)] Auto Manual 0.0 (0) 0.0-7.0 (0-1/4) 3.5 (1/8) 0.0-7.0 (0-1/4) 0.0 (0) 0.0-7.0 (0-1/4) 1.0 (1/16) 1.0-3.0 (1/16-1/8) 3.5 (1/8) 0.0-7.0 (0-1/4) 5.0 (3/16) 1.5-7.0 (1/16-1/4) 3.5 (1/8) 2.5-5.0 (3/32-3/16) 5.0 (3/16) 2.5-5.0 (3/32-3/16) 5.0 (3/16) 0.0-7.0 (0-1/4) 5.0 (3/16) 0.0-7.0 (0-1/4) 0 (0) -3← →3 0 (0) -3← →3 3.5 (1/8) 2.5-7.0 (3/32-1/4) 4.0 (3/16) 0.0-7.0 (0-1/4) Auto Manual 2.5 (3/32) 0.2-5.0 (1/64-3/16) 2.5 (3/32) 0.2-5.0 (1/64-3/16) 2.5 (3/32) 1.5-4.0 (1/16-3/16) 2.5 (3/32) 1.0-4.0 (1/16-3/16) 1.4 (1/16) 0.0-4.0 (0-3/16) 1.0 (1/16) 0.2-4.0 (1/64-3/16) 2.0 (1/16) 1.0-4.0 (1/16-3/16) 2.5 (3/32) 1.0-4.0 (1/16-3/16) 2.5 (3/32) 0.5-4.0 (1/32-3/16) 2.5 (3/32) 0.5-4.0 (1/32-3/16) 2.0 (1/16) 1.0-3.5 (1/16-1/8) 2.0 (1/16) 1.0-3.5 (1/16-1/8) 2.5 (3/32) 1.6-4.0 (1/16-3/16) 2.5 (3/32) 0.2-4.0 (1/64-3/16) Yes* ( J ) Rev. Yes* ( J ) Rev. Yes* ( J ) Reinf. Yes ( J ) Reinf. Yes* ( J ) Rev. Yes* ( J ) Reinf. No Reinf. No Reinf. Yes* ( J ) Reinf. Yes* ( J ) Reinf. No Reinf. No Reinf. Yes* ( J ) Reinf. Yes* ( J ) Reinf.