Brother International CS7130 Operation Manual - Page 34
Blind Hem Stitching
View all Brother International CS7130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
UTILITY STITCHES CAUTION • Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/ stop button) is accidentally pressed and the machine starts sewing. Basic stitching 1 Baste or pin together the fabric pieces. 2 Attach zigzag foot "J". 3 Select a stitch. (Refer to page 25.) 4 Lower the needle into the fabric at the beginning of the stitching. 5 Start sewing. (Refer to page 26.) • For details on sewing reverse/reinforcement stitches, refer to "Sewing reinforcement stitches" (page 27). 6 When sewing is finished, cut the thread. (Refer to page 27.) ■■Changing the needle position With the straight stitch (left needle position) and the triple stretch stitch, the needle position can be adjusted. Pressing the "+" side of the stitch width adjustment key moves the needle to the right; pressing the "-" side of the stitch width adjustment key moves the needle to the left. 1 Stitch width 2 Stitch width adjustment key 3 Left needle position 4 Right needle position 32 BLIND HEM STITCHING You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing. Stitch Name Pattern Presser Foot Pattern No. Blind hem stitch R 10 R 11 CAUTION • Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/ stop button) is accidentally pressed and the machine starts sewing. Memo • When selecting stitch or , stitch numbers "0", "-1", "-2" or "-3" may be displayed on the LCD by pressing "-" side of the stitch width adjustment key, then the needle drop point will be changed to the left. Stitch numbers "0", "1", "2" or "3" may be displayed on the LCD by pressing "+" side of the stitch width adjustment key, then the needle drop point will be changed to the right. • When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not be achieved. 1 Reverse the skirt or pants. 2 1 Wrong side of fabric 1 4 2 Right side of fabric 3 Edge of fabric 3 4 Bottom side 2 Fold the fabric along the desired edge of the hem, and press. 2 1 1 Wrong side of fabric 2 Right side of fabric 4 3 Edge of fabric 4 Desired edge of hem 13 2 1