Brother International CS7130 Operation Manual - Page 42

Appliqués, Patchwork crazy quilt stitching, Piecing

Get Brother International CS7130 PDF manuals and user guides View all Brother International CS7130 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

UTILITY STITCHES Stitch Name Joining stitch Hand-look quilting Quilting stippling Pattern Presser Foot Pattern No. J 15 J 16 J 17 J 45 J 49 CAUTION • Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/ stop button) is accidentally pressed and the machine starts sewing. Memo • Make reinforcing straight stitches at the beginning and the end of stitching. CAUTION • Be careful that the needle does not hit a pin during sewing, as the needle can break. You may also be injured. Patchwork (crazy quilt) stitching 1 Fold the edge of the top piece of fabric and place it over the lower piece. 2 Sew the two pieces of fabric together so the pattern spans both pieces. Appliqués You can create an appliqué by cutting a different piece of fabric into a shape and using it as a decoration. 1 Baste the cut design to the fabric. CAUTION • If glue is used to hold the cut design in place on the fabric, do not apply glue to areas that will be sewn with the machine. If glue is attached to the needle or race, the machine may be damaged. 2 Attach zigzag foot "J". 3 Select stitch . 4 Sew along the edge of the fabric with the needle dropping off the edge at the right. Piecing Sewing together two pieces of fabric is called "piecing". The fabric pieces should be cut with a 6.5 mm (1/4 inch) seam allowance. Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the right side or the left side of the presser foot. 1 Baste or pin along the seam allowance of the fabric that you wish to piece together. 2 Attach zigzag foot "J". 3 Select stitch or . 4 Sew with the side of the presser foot aligned with the edge of the fabric. • For a seam allowance on the right side Align the right side of the presser foot with the edge of the fabric, and sew using stitch . 1 1 Appliqué fabric 2 Needle drop point 5 Remove the basting, if necessary. 40 1 6.5 mm (1/4 inch)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
UTILITY STITCHES
40
Stitch Name
Pattern
Presser Foot
Pattern No.
Joining stitch
J
15
J
16
J
17
Hand-look
quilting
J
45
Quilting
stippling
J
49
CAUTION
•
Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or
(start/
stop button) is accidentally pressed and the
machine starts sewing.
Appliqués
You can create an appliqué by cutting a different
piece of fabric into a shape and using it as a
decoration.
1
Baste the cut design to the fabric.
CAUTION
•
If glue is used to hold the cut design in place
on the fabric, do not apply glue to areas that
will be sewn with the machine. If glue is
attached to the needle or race, the machine
may be damaged.
2
Attach zigzag foot “J”.
3
Select stitch
.
4
Sew along the edge of the fabric with the
needle dropping off the edge at the right.
1
Appliqué fabric
2
Needle drop point
5
Remove the basting, if necessary.
Memo
•
Make reinforcing straight stitches at the beginning
and the end of stitching.
CAUTION
•
Be careful that the needle does not hit a pin
during sewing, as the needle can break. You
may also be injured.
Patchwork (crazy quilt) stitching
1
Fold the edge of the top piece of fabric and
place it over the lower piece.
2
Sew the two pieces of fabric together so the
pattern spans both pieces.
Piecing
Sewing together two pieces of fabric is called
“piecing”. The fabric pieces should be cut with a 6.5
mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
1
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
2
Attach zigzag foot “J”.
3
Select stitch
or
.
4
Sew with the side of the presser foot aligned
with the edge of the fabric.
•
For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch
.
1
1
6.5 mm (1/4 inch)