Brother International CS7130 Operation Manual - Page 33

3 UTILITY STITCHES OVERCASTING STITCHES 3 You can use the overcasting stitches to join together seams and finish them in one operation. They are also useful for sewing stretch materials. Position the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever. Stitch Name Pattern Presser Foot Pattern No. Zigzag stitch J 04 3-point zigzag stitch Overcasting stitch J 05 G 06 G 07 J 08 1 Guide 4 Slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. 3 5 Sew with the edge of the fabric against the presser foot guide. J 09 1 CAUTION • Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/ stop button) is accidentally pressed and the machine starts sewing. Using zigzag foot 1 Attach zigzag foot "J". 2 Select a stitch. (Refer to page 25.) 3 Sew to the edge of the fabric. 1 Needle drop point CAUTION • After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. 1 Check that the needle does not touch the presser foot. 1 Needle drop point Using overcasting foot 1 Attach overcasting foot "G". 2 Select stitch or . (Refer to page 25.) BASIC STITCHING Straight stitches are used for sewing plain seams. Stitch Name Pattern Presser Foot Pattern No. Left Straight Center J 00 J 01 Triple stretch stitch J 02 31