Brother International DCP-J140W Quick Setup Guide - English - Page 21

For Wireless Network Users 12 Manual configuration from the control panel (Windows® and Macintosh) You must have the wireless settings you wrote down for your network in step 11-b on page 17 before you proceed. a On your machine, press Menu. Press a or b to choose 3.Network and press OK. Press a or b to choose 2.Setup Wizard and press OK. When WLAN Enable? is displayed, press a to accept. This will start the wireless setup wizard. To cancel, press Stop/Exit. b The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs. If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step 11-b on page 17, then press OK. If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, press a (Next) and go to c. If the machine asks you to enter a Network Key, go to d. Otherwise, go to e. Note • If a list of SSIDs is not displayed, make sure your access point is on. Move your machine closer to the access point and try starting from a again. • If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For details, see the Network User's Guide. c Press a (Yes) to connect your machine using WPS. (If you choose b (No) to continue manual setting, go to d to enter a Network Key.) When the LCD shows Press WPS on rtr, press the WPS button on your wireless access point/router, and then press a (Next) to proceed. Go to e. d Enter the Network Key you wrote down in step 11-b on page 17 using the a, b keys to choose each letter or number. Use Enlarge/Reduce key or Number of Copies key to move the cursor left or right. For example, to enter the letter a, press the a key once. To enter the number 3, hold down the a key until it appears. The letters appear in this order: lower case, upper case, numbers and then special letters. (For more information, see Entering Text for Wireless Settings on page 31.) Press OK when you have entered all the characters, then press a (Yes) to apply your settings. e Your machine will now try to connect to your wireless network. It may take a few minutes. f A connection result message appears for 60 seconds on the LCD and a wireless LAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 23. Wireless setup is now complete. To install MFL-Pro Suite, continue to step 13. For Windows® Users: Now go to Page 25 For Macintosh Users: Now go to Page 28 Wireless Network 21