Brother International DCP-L5600DN Secure Print Users Guide - Page 22
Con the Card Reader Settings, Limit Data Length
View all Brother International DCP-L5600DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3.6 Configure the Card Reader Settings 1. Click the Administrator tab. 2. Click Card Reader Setting. If you use an external card reader Enable USB card reader support. If you use an internal card reader a. Enable Internal NFC reader. b. Select the supported types of the internal NFC card reader from the Supported Types drop-down list (ALL/MIFARE/my-d/Tag-it/ICODE/FeliCa, Default: ALL). c. Specify the Notation format of the card ID obtained by the internal NFC card reader and then submitted to the server (Decimal/Hexadecimal, Default: Decimal). d. Specify the Byte Order of the card ID obtained by the internal NFC card reader (Normal/Reverse, Default: Normal). e. Specify the maximum data length of the card ID obtained by the internal NFC card reader and submitted to the server in the Limit Data Length field (1 - 255, Default: 20). f. (Optional) Specify the prefix of the card ID obtained by the internal NFC card reader in the Add Leading Character field (1 - 20 ASCII characters, Default: blank). g. (Optional) Specify the suffix of the card ID obtained by the internal NFC card reader in the Add Trailing Character field (1 - 20 ASCII characters, Default: blank). 3. Click Submit. 4. Before you give the ID card to the user, test the function to make sure it is working correctly. Go to section 3.7 Test the New ID Card. 19