Brother International Innov-is XJ2 My Design Snap Application Instructions - Page 13

CREATING EMBROIDERY DATA IN MY DESIGN CENTER WITHIN THE HOOP 8. Select the image transferred from the smartphone, and then press Set key. 9. The carriage will be positioned so that the beam of the W+ embroidery foot is very close to the center of the bottom circle of the positioning sticker. Use the arrow keys (shown to the left) to align the LED pointer with the center of bottom circle of the embroidery positioning sticker, and then press OK key. By calibrating the position in this way, the embroidery pattern to be created can be precisely positioned. 10. The fabric that was photographed and the embroidery positioning sticker will be displayed on the machine's LCD screen. 11. Display the screen enlarged with Zoom key in the upper-left corner of the screen. 12. Move the red frame in the pattern preview area until the area where you want to draw the embroidery appears in the pattern drawing area. 13. With the touch pen (stylus), draw the embroidery lines on top of the background appearing in the pattern drawing area. 14. Press Next key to continue to the stitch setting screen. 15. On this screen, you can select the different regions and lines within the design and make change to the stitch settings. Refer to your machine's Operation Manual for more information about My Design Centers feature and functions. 16. After assigning stitch types and properties, select Preview. Set the design and convert to embroidery data. 17. Embroider the design to complete the process. Another practical application for loading an image as a backdrop is adding decorative stitching around an embroidered pattern. This process is explained in the machine's Operation Manual. For the precision required for this type of project, we recommend using the Advanced mode of the application. 11