Brother International Innov-is XJ2 My Design Snap Application Instructions - Page 14

CREATING EMBROIDERY DATA IN MY DESIGN CENTER WITH IMAGE ON THE SMARTPHONE Creating Embroidery Data in My Design Center with Image from the Smartphone Your machine's My Design Center function allows you to create embroidery data from images transferred by either a USB media or from the My Design Snap application. The images are divided into two categories: Line drawings and illustrations. Line Drawings Illustrations • Must be drawn clearly using lines with approximately 1 mm thickness • Should be drawn in a strong contrast If the lines are too short or gathered too densely, they will not be loaded correctly. If you cannot convert the line drawing as expected, you can load the image as a background and use the stylus to trace the elements of the drawing. Line drawings are converted without recognizing the thickness of lines. If you want to change the thickness of lines, specify in the settings screen. Line drawings are converted as black lines. You can change the color. For more information about the process, refer to your machine's Operation Manual. • Must be clearly drawn, with no gradation, fading or blurriness • Must be at least a 5mm (approximately 1/4 inch) square • Must be extremely simple images If the image is too complex, it will not be loaded correctly. If you cannot convert the illustration as expected, you can load the image as a background and use the stylus to trace the elements of the drawing. For more information about the process, refer to your machine's Operation Manual. 12