Brother International Innov-is XJ2 My Design Snap Application Instructions - Page 9

POSITIONING AN EMBROIDERY DESIGN (EASY MODE) Positioning an Embroidery Design Positioning a Design Using the Easy Mode To use the My Design Snap app to position a design, you will first need to hoop the fabric (with stabilizer) in one of the codified hoops and set an embroidery design. The example shown in this section uses the Easy mode in the app and design 007 from embroidery category 1/subcategory 15. Subcategory Design After the selected pattern appears on the machine's screen, press Set key in the lower-right corner of the screen. On your smartphone, open the app and select the first icon . After the application pairs with your machine, leave the mode set to Easy. 1. When the embroidery frame capture screen appears, align the frame on the screen with the actual embroidery frame. The black marks at the top and bottom of the frame must align with the black circles in the app. 2. Position the smartphone so that the blue circles in the bars on the right and bottom of the screen are within the adjustment areas. When the countdown begins, the photo has been successfully taken. 3. Your smartphone will prompt you to send the image to your machine. You will receive confirmation when the design has been sent. 4. After the image is delivered to your machine, you will see a prompt on the machine's screen to update. Attach the frame with fabric on embroidery cariedge, then select OK to update. The embroidery arm will move. 5. On the machine's LCD screen, the embroidery pattern that you set appears in the fabric that was photographed. Press Edit key in this screen to move, rotate, and/or resize the embroidery pattern. 6. Embroider the design to complete the process. 7