Brother International PT-P900 P-touch Template Manual/ Command Reference - Page 43
^PC Specify print start received character count
View all Brother International PT-P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
P-touch Template Command Reference ^PC Specify print start received character count ASCII: ^ P C n1 n2 n3 Decimal: 94 80 67 nd1 nd2 nd3 Hexadecimal: 5E 50 43 nh1 nh2 nh3 Parameters 0≤n1≤9 0≤n2≤9 0≤n3≤9 Description Specifies the number of characters to be received in order to start printing. (n1*100)+(n2*10)+n3: Print start received character count (bytes) (1 to 999) The default print start received character count is 10. This command is a dynamic command. One full-width character is treated as 2 bytes, and one half-width character is treated as 1 byte. Example To change the print start received character count to 100 characters: Since n1=1, n2=0 and n3=0, the command will be as follows. ^ P C 1 0 0 (5Eh 50h 43h 31h 30h 30h) - 37 - 7. Control Command Details