Brother International PT-P900 P-touch Template Manual/ Command Reference - Page 54
^FC FNC1 replacement setting
View all Brother International PT-P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
P-touch Template Command Reference ^FC FNC1 replacement setting ASCII: ^ F Cn Decimal: 94 70 67 nd Hexadecimal: 5E 46 43 nh Parameters 0≤n≤1 Description This command selects whether or not GS codes, which are included in bar code protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes. n: FNC1 replacement setting (ON: 1; OFF: 0 (default)) This command is a dynamic command. Remarks Invalid if n is a value other than 1 or 0 Example To disable FNC1 replacement: Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows. ^ F C 0 (5Eh 46h 43h 30h) - 48 - 7. Control Command Details
P-touch Template Command Reference
- 48 -
7.
Control Command Details
^FC
FNC1 replacement setting
ASCII:
^
F
C
n
Decimal:
94
70 67 nd
Hexadecimal: 5E
46 43 nh
Parameters
0
≤
n
≤
1
Description
This command selects whether or not GS codes, which are included in bar code protocols such as
GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
This command is a dynamic command.
Remarks
Invalid if n is a value other than 1 or 0
Example
To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows.
^ F C 0
(5Eh 46h 43h 30h)