Brother International PT-P900 P-touch Template Manual/ Command Reference - Page 55
^CF Full cut setting
![]() |
View all Brother International PT-P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
P-touch Template Command Reference ^CF Full cut setting ASCII: ^ C F n1 n2 Decimal: 94 67 70 nd1 nd2 Hexadecimal: 5E 43 46 nh1 nh2 Parameters 0≤n1≤9 0≤n1≤9 Description Specifies whether or not full cut is used, and specifies the number of copies. (n1*10)+n2: Full cut and number of copies settings (00: OFF; 01 to 99: Number of copies) (Default value: 01) This command is a dynamic command. Remarks The full cut label number setting can be between 1 and 99. This command becomes invalid if any other value has been specified. Example To cut after every two labels: Since the auto cut label number will be set to 2, n1=0 and n2=2. Therefore, the command will be as follows. ^ C F 0 2 (5Eh 43h 46h 30h 32h) - 49 - 7. Control Command Details
![](/manual_guide/products/brother-international-ptp900-ptouch-template-manual-command-reference-6accd52/55.png)
P-touch Template Command Reference
- 49 -
7.
Control Command Details
^CF
Full cut setting
ASCII:
^
C
F
n1
n2
Decimal:
94
67 70 nd1 nd2
Hexadecimal: 5E
43 46 nh1 nh2
Parameters
0
≤
n1
≤
9
0
≤
n1
≤
9
Description
Specifies whether or not full cut is used, and specifies the number of copies.
(n1*10)+n2:
Full cut and number of copies settings
(00: OFF; 01 to 99: Number of copies) (Default value: 01)
This command is a dynamic command.
Remarks
The full cut label number setting can be between 1 and 99. This command becomes invalid if any other
value has been specified.
Example
To cut after every two labels:
Since the auto cut label number will be set to 2, n1=0 and n2=2. Therefore, the command will be as follows.
^ C F 0 2
(5Eh 43h 46h 30h 32h)