Brother International XL-2121 Users Manual - English - Page 34
Push the Reverse Sewing Lever and stitch
View all Brother International XL-2121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
■ Changing Sewing Direction Stop the machine at the point where you want 1 to change direction with the needle still in the fabric. Raise the presser foot and turn the fabric to 2 line up its new direction using the needle as a turning point for the fabric. ■ Removing the Material from the Machine Stop the machine. 1 Raise the needle to its highest position and make sure that the thread take-up lever is also in its highest position. Lift the presser foot and pull the fabric out 2 gently to the left hand side. Cut both threads with the thread cutter on the 3 left hand side of the machine. 1 2 Lower the presser foot and start sewing in the 3 new direction. ■ Finishing Sewing You can use stitching to lock the threads at the end of the seam or where you need to strengthen a stitch. Stitch to the end of the seam and stop. 1 Push the Reverse Sewing Lever and stitch 2 backwards for 1 cm (3/8 inch) from the end of the fabric. 1 Thread cutter To prepare the machine for the next seam, 4 pull about 10 cm (4 inch) of thread through the toes of the presser foot toward the back of the machine. ■ Top Stitching and Stretch Materials You can use straight stitch for top stitching and sewing lightweight fabrics. You can use triple stretch stitch for sewing stretch fabrics. 33