Canon 9192A006 FAXPHONE L80 Basic Guide - Page 75
Replacing the FX-3 Cartridge
UPC - 750845819144
View all Canon 9192A006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Maintenance Replacing the FX-3 Cartridge The only component of your machine you will need to replace is the FX-3 cartridge. The FX-3 S Cartridge is a starter cartridge that comes with your machine, and yields approximately 1,500 pages based on 5% coverage of an A4 size page. The replacement FX-3 cartridge yields approximately 2,700 pages based on 5% coverage of an A4 size page. To purchase this cartridge, contact the Canon Customer Care Center, or your business machine retailer/dealer. When CHANGE CARTRIDGE appears in the LCD, you may need to replace the cartridge. However, it may also indicate that the toner inside the cartridge is simply unevenly distributed. Before replacing the cartridge, follow this procedure to distribute the toner evenly: 1 Remove the cartridge from the machine (1 steps 1 to 4, below). 2 Gently rock the cartridge from side to side a few times to distribute the toner evenly inside it. • Poor print quality may result if the toner is unequally distributed. 3 Reinsert the cartridge into the machine (1 steps 8 and 9, p. 8-9). If after following the procedure above, CHANGE CARTRIDGE remains in the LCD or print quality does not improve, follow this procedure to replace the cartridge: 1 Remove any documents and printouts from the machine. 2 Make sure the machine is plugged in. 3 Lift the latch and open the front cover. c Do not try to open the front cover without lifting the latch since this may damage your machine. Chapter 8 Maintenance 8-7