Canon 9192A006 FAXPHONE L80 Basic Guide - Page 92
Printing Problems
UPC - 750845819144
View all Canon 9192A006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Printing Problems I The machine beeps while printing. The machine may have a paper jam. • Clear the paper jam (1 p. 9-3). I Nothing prints. The power cord may not be plugged in securely. • Check that the power cord is plugged securely into the machine and into the wall outlet (1 Set-Up Instructions). If the machine is plugged into a power strip, make sure the power strip is plugged in and turned on. You may not have removed the plastic seal from the cartridge. • Make sure you install the cartridge properly (1 Set-Up Instructions). The cartridge may need to be replaced. • Replace the cartridge (1 p. 8-7). I Printout does not match the print media size. The print media may not be loaded correctly. • Make sure the print media is loaded correctly in the multi-purpose tray (1 User's Guide). I Printout is skewed. The print media may not be loaded correctly. • Make sure the print media is loaded correctly in the multi-purpose tray (1 User's Guide). • Make sure the paper delivery slots are clear. I Print media jams occur. You may not be using the correct paper delivery slot. • Select the correct paper delivery slot (1 p. 3-7). I Printout is not clear. You may not be using the correct print media type. • Make sure you load print media that meets the requirements for the machine (1 p. 3-4). You may be printing on the wrong side of the paper. • Some papers have a "right" side for printing. If the print quality is not as clear as you would like it to be, try turning the paper over and printing on the other side. I Printout has vertical white streaks. Toner may be low or unevenly distributed. • Redistribute the toner inside the cartridge (1 p. 8-7). If the problem persists, replace the cartridge (1 p. 8-7). 9-14 Troubleshooting Chapter 9