Canon Color imageCLASS MF641Cw imageCLASS MF746Cdw/MF745Cdw/MF743Cdw/MF741Cdw/ - Page 632
Quick Adjust, Adjust Copy Image, Select <Quick Adjust>.
View all Canon Color imageCLASS MF641Cw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 632 highlights
Maintenance 14 Gently close the feeder or the platen glass cover. If the message is displayed ● Did you load the paper displayed in step 4 into the paper source? ● Did you place the adjustment image with the print side face down, with the black stripe toward the back side of the machine? ● Has a paper jam occurred? For more information, see "Troubleshooting (FAQ)" on the online manual website. ● Is the amount remaining in toner cartridge sufficient? If the amount remaining in the toner cartridge is low, it is recommended that you replace the toner cartridge. Checking the Remaining Amount of Consumables(P. 618) ● Is the transfer belt inside the machine dirty? Cleaning the Transfer Belt (ITB)(P. 612) Quick Adjust This adjustment maintains the optimized status that was acquired by . If the result of this adjustment is not satisfactory, perform . This adjustment may be automatically performed after you replace a toner cartridge. ● Quick adjustment is not available while scanning or printing is performed. ● You can also configure so that a quick adjustment is automatically performed immediately after the machine is turned ON or when a first print job is performed. (P. 489) 1 Select in the Home screen. Home Screen(P. 126) 2 Select . 3 Select . 4 Select . ➠ The adjustment starts. Adjust Copy Image Use this adjustment when the appearance of copy is extremely different from that of the original. The adjustment operation is to "print out the adjustment image and scan it." Note that you cannot perform this adjustment while performing some functions such as scanning and printing. 624