Canon EOS 1 Instruction Manual - Page 106
Troubleshooting
UPC - 013803119602
View all Canon EOS 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting If you run into a problem operating your camera, check the following table to see if you can find the cause of the problem. If the trouble persists, take the camera to your nearest Canon service center. (A list of service centers is provided at the back of this instruction book.) Symptom Cause Remedy Referral page The main switch is set to Set the main switch to A or 16 . . Nothing appears in the The battery is exhausted. Replace the battery with a 14 LCD panel. new one. The battery is inserted Reload the battery correct- 14 upside down. ly. The main switch is set to Set the main switch to A or 16 . . The automatic film load- ing function does not The film is not loaded cor- Remove the film and 23 operate. rectly. (The film transport reload it correctly. (wind/rewind) ( ) is blinking in the LCD panel.) The main switch is set to Set the main switch to A or 16 The camera settings . . cannot be changed. The quick control dial Set the quick control dial 10 switch is not set to . switch to . The lens' focus mode Set the lens' focus mode 18 switch is set to M. switch to AF. Autofocusing does not operate. Custom function F-4 is set to 1. Press AE lock button to autofocus, or set custom 82 84 function F-4 to 0 and press shutter button halfway. The main switch is set to Set the main switch to A or 16 . . The film is not loaded cor- Remove the film and 23 rectly. (The film transport reload it correctly. The shutter does not release. (wind/rewind) ( ) is blinking in the LCD panel.) A roll of rewound film is still Remove the exposed film 25 in the camera. (The film and load a new roll. rewind completion ( .) is blinking in the LCD panel.) 106