Canon EOS 1 Instruction Manual - Page 107

Cause, Remedy, Referral, Symptom, Replace the battery with

Page 107 highlights

Troubleshooting Symptom Cause Remedy Referral page The subject is not focused. Press the shutter button 20 (The in-focus indicator is again halfway to refocus The shutter does not blinking in the viewfinder.) release. the subject. If the subject still cannot be focused, refer to "3. Difficult Subjects for Autofocus" on page 34. The camera is being used The battery capacity quick- 14 in a cold environment. ly depleted due to the cold. The film does not rewind. Replace it with a new battery. Custom function F-1 is set Set custom function F-1 to 82 to 1 or 3. 0 or 2. 84 The battery is extremely Replace the battery with a 7 depleted. new one. If the " " indi- cator goes out, the camera will operate normally. " " blinks in the LCD panel. The camera has undergone some type of malfunction. Remove the battery from the camera and reload it. If the blinking " " indicator disappears, the camera will operate normally. • If the " " indicator does not stop blinking after repeating the above operations several times, there is a malfunction in the camera. Take the camera to your nearest Canon service center for diagnosis and repair. 7 14 Back cover 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

107
Troubleshooting
The subject is not focused.
(The in-focus indicator is
blinking in the viewfinder.)
The camera is being used
in a cold environment.
Custom function F-1 is set
to 1 or 3.
The battery is extremely
depleted.
The camera has under-
gone some type of mal-
function.
Press the shutter button
again halfway to refocus
the subject. If the subject
still cannot be focused,
refer
to
“3.
Difficult
Subjects for Autofocus” on
page 34.
The battery capacity quick-
ly depleted due to the cold.
Replace it with a new bat-
tery.
Set custom function F-1 to
0 or 2.
Replace the battery with a
new one. If the “
” indi-
cator goes out, the camera
will operate normally.
Remove the battery from
the camera and reload it.
If the blinking “
” indica-
tor disappears, the camera
will operate normally.
If the “
” indicator does
not stop blinking after
repeating the above opera-
tions several times, there is
a malfunction in the camera.
Take the camera to your
nearest Canon service cen-
ter for diagnosis and repair.
Cause
Remedy
The shutter does not
release.
The
film
does
not
rewind.
” blinks in the LCD
panel.
20
14
82
84
7
7
14
Back
cover
Referral
page
Symptom