Canon EOS 1 Instruction Manual - Page 14
Loading the Battery
UPC - 013803119602
View all Canon EOS 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Loading the Battery This camera operates on a 6-volt, 2CR5 lithium battery, housed in the grip. • Refer to page 93 for additional information on the batteries of the EOS-1 N DP model and page 96 for the EOS-1 N HS model and the EOS-1 N RS model. 1 Using a coin or similar object, turn the grip screw counterclockwise to N loosen the grip. The screw cannot be removed from the grip. 2 2 Slide the grip down to remove. 1 3 Load the battery upside down into the grip so that its terminals align with the terminals in the battery compartment. • The battery label should be facing toward you and the terminals should be on the bottom after the battery is installed. Battery Ejector Lever 4 After placing the battery into the front of the compartment, push it all the way into the compartment as shown in the illustration. • To remove the battery from the grip, press the battery ejector lever. 5 Replace the grip on the camera and turn the screw clockwise to firmly lock it in place. L It hIu m Lithium batteries may not be available in some areas. Be sure to take along a spare when going on a trip or embarking on an important shooting assignment. 14