Canon EOS 1 Instruction Manual - Page 23
Insert the film cartridge at a slant, bottom end entering the camera - mark v
UPC - 013803119602
View all Canon EOS 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1 2 A L Film Loading 1 Set the main switch to "A". 2 Open the back cover by using your thumb to press the back cover lock release button while sliding the latch down. • If you find it difficult to perform both operations with one finger, use one finger to press the back cover release button and another finger to operate the latch. 3 Insert the film cartridge at a slant with the flat end facing up and the bottom end entering the camera first. 4 Carefully pull the film tip across until it reaches the orange mark. • Hold down the film cartridge while aligning the film to prevent slack. FILM CORRECT WRONG A L • If you pull out too much film, wind the excess back into the cartridge. The shutter curtain operates with extremely high precision and can be easily damaged if touched. When loading or unloading film, BE CAREFUL not to touch the shutter curtain accidentally with your finger or the tip of the film. 23