Canon FAXPHONE 40 User Guide - Page 62
User Settings
View all Canon FAXPHONE 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
USER SETTINGS Name DATE & TIME UNIT TELEPHONE # UNIT NAME TX TERMINAL ID TTI POSITION TELEPHONE # MARK SCAN CONTRAST OFFHOOK ALARM VOLUME CONTROL LINE MONITOR VOL CALLING VOLUME ALARM VOLUME KEYPAD VOLUME RX CALL LEVEL TEL LINE TYPE Description Set the date and time (24-hour clock) using the numeric buttons. Enter your fax number using the numeric buttons. This is the name that appears at the top of each fax page you send (see p. 2-7). This option sets the parameters for the identification header that appears on every page you send. Settings - - - - Select the position of the TTI. Select the icon for the fax number. Set the density of the reproduction. Enable/disable the off hook alarm. The alarm alerts you that the optional handset is not seated properly in its cradle. Set the volume of the fax sounds. INSIDE IMAGE/ OUTSIDE IMAGE FAX/TEL STANDARD/DARKER/ LIGHTER ON/OFF - Set the volume of the line monitor (sound during dialing). 0 (off)/1/2/3 Set the volume of the ring produced when the fax detects a voice call during FAX/TEL switchover. 1/2/3 Set the volume of the error alarm sound. 0 (off)/1/2/3 Set the volume of the keypad. Set the ring tone. Set the dialing method the fax uses to match the type of phone line you have. 0 (off)/1/2/3 STANDARD/HIGH TOUCH TONE/ ROTARY PULSE (Default settings are shown in bold type.) 7-2