Canon LASER CLASS 810 LASER CLASS 830i/810 Basic Operation Guide - Page 298
Feeder Glass Dirty, Document Too Long
View all Canon LASER CLASS 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
Message CHANGE REG'D SIZE →PAPER SETTINGS CHECK DOCUMENT DATA ERROR PRESS START KEY DOCUMENT TOO LONG FEEDER GLASS DIRTY CLEAN FEEDER GLASS FEEDER PAPER JAM CHECK THE FEEDER INITIALIZING... PLEASE WAIT LEFT COVER OPEN CLOSE COVER Description Action - The paper size is not appropriate for printing a report or list. - Set the paper size to , , , , , , , , or , and then load paper of the same size. - The paper ran out while printing a received document, report or list. - Load paper in the paper cassette. A document jam may have occurred in the ADF. Remove the jammed document. The machine may have trouble. Press [Start] to restore all settings to the default. If the message persists, contact Canon Customer Care Center. - The document fed from the - Reduce the length of the ADF is longer than 24 7/8" document to within 24 7/8" (630 mm), or is not feeding (630 mm), then try again. correctly. - If the document is shorter - The document is longer than than 17" (432 mm), then try 17" (432 mm) when you the procedure again. are sending e-mail, I-fax or sending a document to a file server. The ADF scanning area may be Clean the ADF scanning area dirty. (See "Cleaning the Machine" on p.10-2.), then press [OK]. A document jam may have occurred in the ADF. Remove the jammed document. This message appears when turning on the main power switch, or when the machine is not ready for printing. Wait until the message disappears. The left cover is open. Check the left cover and make sure that it is completely closed. Troubleshooting 11-8