Canon LASER CLASS 810 LASER CLASS 830i/810 Basic Operation Guide - Page 344
Rx Footer, Horiz & Vertical
View all Canon LASER CLASS 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
TX/RX SETTINGS 2. RX SETTINGS Sets the reception features. 1. SELECT CASSETTE SWITCH A SWITCH B 2. TWO-SIDED PRINT 3. RECEIVE REDUCTION ON 1. RX REDUCTION 2. REDUCE DIRECTION OFF 4. RX PAGE FOOTER 5. CONT. PRINTING RX TO MEMORY KEEP PRINTING You can set how the machine prints documents when there is no paper matching the size of the received document. The image is printed over two sheets of paper that have the same combined size as the received document. - ON - OFF The image is printed with blank space on paper that has the same width as the received document. - ON - OFF Sets whether the machine prints received documents on both sides of the paper. (See Reference Guide > Send/Receive.) - OFF - ON Sets whether the received images print out at a reduced size. (See Reference Guide > Send/Receive.) Image reduction is turned on. Selects the reducing type. - AUTO - FIXED REDUCTION (90%, 95%, 97%, 75%) Selects the reducing direction. - VERTICAL ONLY - HORIZ & VERTICAL Image reduction is turned off. Sets whether to insert the machine's fax number and the sender information on received faxes. - OFF - ON Selects how the machine responds when the message appears. The machine stores all documents in memory. The machine does not store documents in memory if the toner runs out. Reset to after replacing the toner cartridge. Machine Settings 12-14